This rotating tool clamp can be fixed in any orientation or adjusted to provide 90° vertical and horizontal movement, allowing tools to be positioned precisely for angled fastening tasks. Either plane can be fixed when needed, giving operators the flexibility to lock the tool in place for repeatable, controlled operations. Its versatile design makes it well-suited for tight workspaces and applications that require frequent angle adjustments.
LB250F MOUNTZ LOADING BENCH QUICK REFERENCE GUIDE
The Mountz Loading Bench provides engineers and metrology professionals with a precision, laboratory-grade solution for effortless and accurate torque wrench calibration and presetting. What’s Included: Loading Bench and Hardware for mounting sensors Accessories sold separately: M ountz torque analyzer, BMX torque sensor and cable for BMX torque sensor.
Calibrating & Testing Torque Wrenches 1. Place the wrench’s drive into the BMX’s female square drive. 2. S ecure the handle of the tool between the clamps on the reaction bar. 3. Turn the hand wheel in clockwise to apply load until the desired torque is read on the analyzer. 4. Once the desired torque is reached, back off the load by turning the wheel in the opposite direction. Torque Sensor Set-up 1. Attached the BMX torque sensor to the base plate. 2. Attach the sensor cable (sold separately) for connecting the BMX with a Mountz torque analyzer with an external sensor connection. 3. Once the BMX is connected with the torque analyzer, follow the instructions in the torque analyzer manual for accessing external transducers. Mounting the LB250F 1. The LB250F needs to be mounted securely before operating. Immobilizing the loading bench is critical for the safety of the operator as well as for the accuracy of torque measurements during operation. A loose loading bench during utilization can impact the validity of torque readings. Use 3/8” bolts (the bolt length will depend on your bench top thickness).
TORQUE ANALYZER
BMX TORQUE SENSOR CABLE
BASE PLATE
1
2
3
Scan for Warranty & Returns Policy
Scan for Manual
Mountz Support North America: + 1.408.850.9978 International: + 44.1428.741756 mountztorque.com
Engineered in the Silicon Valley Since 1965
Copyright © 2025 Mountz Inc. All Rights Reserved. V1/060125
Page 1Made with FlippingBook - Online catalogs