CALIBRATION INSTRUMENTATION
UV/IR Flame Detector Lamp • Used to test “end-to-end” FSC Model FS24X, and FS18X Multi-Spectrum Electro Optical Fire and Flame Detectors • Class I, Div. 1 approved explosion-proof test lamp (flame simulator) for testing externally in a hazardous location • Detect at 185-235 nm UV, near IR, wideband IR, 4.4 u IR radiation • Powered by rechargeable, long-life, more capacity, “memory-free” nickel hydride battery pack
Flame Detector Test Lamp
• Simulates fire conditions for verifying the functionality of Ultraviolet (UV), Ultraviolet/ Infrared (UV/IR) and Triple Infrared (3IR) flame detectors • Rechargeable, hand-held unit, certified Class I Division1 for hazardous areas • Utilizes authentic ultraviolet and infrared radiation sources
MODEL TL-2055-RENTAL
MODEL TL-MP-KIT-RENTAL
Field Dry-block Temperature Calibrator
• Active dual-zone temperature control provides exceptional temperature homogeneity • DLC (Dynamic Load Compensation) system for perfect temperature uniformity • Up to 20 different temperature steps, max/min temperature limits and ten (10) complete instru- ment setups may be programmed Reference Temperature Calibrator
• Temperature range of 35 to 350°C, it reaches maximum temperature in 12 minutes • Stability of ±0.05°C and uniformity of 0.4°C • Wells: 1/16" (1.6mm), 1/8" (3.2mm), 3/16" (4.8mm), 1/4" (6.35mm), 3/8" (9.5mm) and 1/2" (12.7mm) • Equipped with RS-232 interface
MODEL RTC-157A-RENTAL
MODEL 9141-A-156-RENTAL
Field Metrology Well Temperature Calibrator
Dry-block Temperature Calibrator • Perfect for checking RTDs, thermocouples, and small bimetal thermometers in the field • Temperature range to 375°C (707°F) and accuracy to ±0.25°C, with stability of ±0.05°C at 0°C • Probe Wells: 1⁄16", 1⁄8", 1⁄4", 5⁄32", and two of 3⁄16" diameter • Temperature scan rate control and eight set-point memory
• Cool to -13°F (-25°C) in 15 minutes and heat to 1220°F (660°C) in 15 minutes • Built-in two-channel readout for PRT, RTD, thermocouple, 4 to 20 mA current • True reference thermometry with accuracy to ±0.01°C • Probe Wells: 1⁄8", 3⁄16", 3/8" and two of 1⁄4" diameter
MODEL 9144-A-156-RENTAL
MODEL 9100S-A-156-RENTAL
Multifunction Process Calibrator • Measures mA, voltage, frequency, thermocouples, RTDs, and checks continuity • Simplify HART hookups with built-in 250Ω resistor • Built-in 24V power supply • Source and read frequency to 2000 CPM • Set any three outputs plus automatic stepping and ramping CALIBRATORS
Voltage/Current Simulator • Simulate the behavior of voltage and current sources in electrical circuits to test and verify circuit designs without the need for actual physical components • 5-digit LCD readout • Automatic calibration • Includes protective boot and kickstand
INSTRUMENTS
INSTRUMENTS
MODEL R5800-RENTAL
MODEL 820-RENTAL
www.itm.com
21 BEST PRICE GUARANTEED
RENTALS
MEILLEUR PRIX GARANTI
LOCATIONS
Made with FlippingBook Online newsletter maker