CALIBRATION INSTRUMENTATION
Documenting Process Calibrator • Measures and sources temperature, pressure, voltage, current, resistance, and frequency • Measure, source, or simultaneous measure/source • Integrated HART communication • Programmable calibration routines • Records and documents results and quickly downloads data via USB interface
Multifunction Calibrator
• Measure/source mA, DC volts, frequency, resist- ance, temperature, and pressure • Measure/source/simulate mA loop parameters • Test flow meters with frequency and CPM functions • Perform linearity tests with auto-step and auto-ramp • Built-in 24 V loop power supply • Store and recall frequently used calibration set ups
MODEL 725US-RENTAL
MODEL 754-RENTAL
Differential Pressure Modules • Fully interchangeable pressure modules turn your
Process Calibrator • 20 mA dc current source/measure/simulate • Simultaneous mA and % of scale readout • Min/Max/Average/Hold/Relative modes • Diode test and continuity beeper • Manual step plus Auto Step and Auto Ramp • 24V Loop power supply • HART mode setting with loop power
process calibrators into pressure calibrators capable of operating with gauge, differential, dual range, absolute and vacuum pressures • Display pressure readings in any of 10 different measurement units you specify in the calibrator setup • Compatible with all FLUKE 700 Series Process Calibrators • Twelve ranges to choose from 1 psi to 30 psi
SERIES 700P-RENTAL & 750P-RENTAL
MODEL 789-RENTAL
Current Loop Calibrator • Built-in selectable 250Ω resistor for HART communications • mA source, mA simulate, mA read, mA read/ loop power, and volts read functions • 24V DC loop power with mA measure mode • Data logging capacity of 9800 records with selectable recording intervals of 1 to 60 seconds
mA Loop Calibrator • mA sourcing, simulation and measurement • 0.015% accuracy and 0.001 mA resolution • Simultaneous mA and % of span display • Selectable step or ramp outputs • 24V Loop supply with mA measure, including 250 Ω HART resistor • 0V to 28V DC measurement
MODEL 709H-RENTAL
MODEL 707-RENTAL
mA Process Clamp Meter
mA Process Clamp Meter
• Measure mA signals without "breaking the loop" • Source, simulate and measure mA signals in circuit • Source mA output signals in a linear ramp or 25% step output • Measure presence of 24V loop power and 1 to 5 or 0 to 10V process signals • Dual backlit display with both mA and % span readings
• Measure 4 to 20 mA signals without "breaking the loop" • 0.2% accuracy and 0.01 mA resolution • Dual backlit display with both mA measurement and percent of 4 to 20 mA span • Measure up to 99.9 mA range non-contact
• Spotlight illuminates hard to see wires • Detachable clamp with extension cable MODEL 771-RENTAL
MODEL 773-RENTAL
www.itm.com
22 BEST PRICE GUARANTEED
RENTALS
MEILLEUR PRIX GARANTI
LOCATIONS
Made with FlippingBook Online newsletter maker