Machinery's Handbook, 31st Edition
Milling Cutters 875 American National Standard Staggered Teeth, T-Slot Milling Cutters with Brown & Sharpe Taper and Weldon Shanks ANSI/ASME B94.19-1997 (R2019) W N L
D
L
W
S
D
N
With Weldon Shank
With B. & S. Taper a,b
Cutter Dia., D
Face Width, W
Neck Dia., N
Taper No.
Bolt Size
Length, L
Length, L
Dia., S
… … …
… … …
2 19 ⁄ 32 2 11 ⁄ 16 3 1 ⁄ 4 3 7 ⁄ 16 3 15 ⁄ 16 4 7 ⁄ 16
1 ⁄ 4
9 ⁄ 16
15 ⁄ 64 17 ⁄ 64 21 ⁄ 64 25 ⁄ 64 31 ⁄ 64
17 ⁄ 64 21 ⁄ 64 13 ⁄ 32 17 ⁄ 32 21 ⁄ 32 25 ⁄ 32 1 1 ⁄ 32
1 ⁄ 2 1 ⁄ 2 3 ⁄ 4 3 ⁄ 4
5 ⁄ 16
21 ⁄ 32 25 ⁄ 32 31 ⁄ 32
3 ⁄ 8 1 ⁄ 2 5 ⁄ 8 3 ⁄ 4
5
7 7 9 9
1 1
1 1 ⁄ 4
5 1 ⁄ 4 6 7 ⁄ 8 7 1 ⁄ 4
1 15 ⁄ 32 1 27 ⁄ 32
5 ⁄ 8
1
53 ⁄ 64 1 1 ⁄ 4 a For dimensions of Brown & Sharpe taper shanks, see information given on page 1023 . b Brown & Sharpe taper shanks have been removed from ANSI/ASME B94.19; they are included for reference only. All dimensions are in inches. All cutters are high-speed steel, and only right-hand cutters are standard. Tolerances: On D , +0.000, - 0.010 inch; on W , +0.000, - 0.005 inch; on N , +0.000, - 0.005 inch; on L , ± 1 ⁄ 16 inch; on S , - 00001 to - 0.0005 inch. American National Standard Form Relieved Corner Rounding Cutters with Weldon Shanks ANSI/ASME B94.19-1997 (R2019) 4 13 ⁄ 16
L
d
S
D
R
Rad., R
Dia., D
Dia., d
Rad., R
Dia., D
Dia., d
S
L
S
L
2 1 ⁄ 2 2 1 ⁄ 2
1 1 ⁄ 4
3 1 ⁄ 2 3 1 ⁄ 8 3 1 ⁄ 4 3 1 ⁄ 2 3 3 ⁄ 4
1 ⁄ 16 3 ⁄ 32
7 ⁄ 16
1 ⁄ 4 1 ⁄ 4 1 ⁄ 4
3 ⁄ 8 3 ⁄ 8 1 ⁄ 2 1 ⁄ 2 1 ⁄ 2 1 ⁄ 2 1 ⁄ 2
3 ⁄ 8
3 ⁄ 8
1 ⁄ 2 3 ⁄ 4 3 ⁄ 4 7 ⁄ 8 7 ⁄ 8
1 ⁄ 2 5 ⁄ 8 3 ⁄ 4 7 ⁄ 8
3 ⁄ 16
7 ⁄ 8
5 ⁄ 16
3 3 3 3
1
1 ⁄ 8
1 ⁄ 4
3 ⁄ 8 3 ⁄ 8 3 ⁄ 8 3 ⁄ 8
1 1 ⁄ 8 1 1 ⁄ 4 1 3 ⁄ 8 1 1 ⁄ 2
5 ⁄ 32 3 ⁄ 16
5 ⁄ 16 5 ⁄ 16
5 ⁄ 16
3 ⁄ 8
1
1 1
4
1 ⁄ 4
3 ⁄ 8 3 ⁄ 8
7 ⁄ 16
5 ⁄ 16 4 1 ⁄ 8 All dimensions are in inches. All cutters are high-speed steel. Right-hand cutters are standard. Tolerances: On D , ± 0.010 inch; on diameter of circle, 2 R , ± 0.001 inch for cutters up to and includ ing 1 ⁄ 8 -inch radius, +0.002, - 0.001 inch for cutters over 1 ⁄ 8 -inch radius; on S , - 0.0001 to - 0.0005 inch; and on L , ± 1 ⁄ 16 inch. 1 1 ⁄ 8 3 1 ⁄ 4 1 ⁄ 2 3 ⁄ 8
Copyright 2020, Industrial Press, Inc.
ebooks.industrialpress.com
Made with FlippingBook - Share PDF online