Machinery's Handbook, 31st Edition
Milling Cutters 895 American National Standard Woodruff Keyseat Cutters—Shank-Type Straight- Teeth and Arbor-Type Staggered-Teeth ANSI/ASME B94.19-1997 (R2019)
W
L
W
D
D
H
Diam.
” 1 2
Shank-type Cutters
Nom. Dia. of Cutter, D
Nom. Dia.of Cutter, D
Length Over all, L
Length Over all, L
Length Over all, L
Nom. Dia.of Cutter, D
Width of Face, W
Width of Face, W
Width of Face, W
Cutter Number
Cutter Number
Cutter Number
202
506 606 806 507 607 707 807
809 1 1 ⁄ 8 1009 1 1 ⁄ 8 610 1 1 ⁄ 4 710 1 1 ⁄ 4 810 1 1 ⁄ 4 1010 1 1 ⁄ 4 1210 1 1 ⁄ 4 811 1 3 ⁄ 8 1011 1 3 ⁄ 8 1211 1 3 ⁄ 8 812 1 1 ⁄ 2 1012 1 1 ⁄ 2 1212 1 1 ⁄ 2
2 1 ⁄ 16 2 1 ⁄ 16 2 3 ⁄ 32 2 1 ⁄ 16 2 3 ⁄ 32 2 1 ⁄ 8 2 1 ⁄ 16 2 3 ⁄ 32 2 1 ⁄ 8 2 3 ⁄ 32 2 1 ⁄ 8 2 3 ⁄ 16 2 1 ⁄ 8
2 5 ⁄ 32 2 3 ⁄ 16 2 1 ⁄ 4 2 5 ⁄ 32 2 3 ⁄ 16 2 7 ⁄ 32 2 1 ⁄ 4 2 3 ⁄ 16 2 7 ⁄ 32 2 1 ⁄ 4 2 5 ⁄ 16 2 3 ⁄ 8 2 3 ⁄ 16 2 7 ⁄ 32
2 1 ⁄ 4 2 5 ⁄ 16 2 3 ⁄ 16 2 7 ⁄ 32 2 1 ⁄ 4 2 5 ⁄ 16 2 3 ⁄ 8 2 1 ⁄ 4 2 5 ⁄ 16 2 3 ⁄ 8 2 1 ⁄ 4 2 5 ⁄ 16 2 3 ⁄ 8
1 ⁄ 4
1 ⁄ 16 1 ⁄ 16 3 ⁄ 32 1 ⁄ 16 3 ⁄ 32 1 ⁄ 16 3 ⁄ 32 1 ⁄ 8
3 ⁄ 4 3 ⁄ 4 3 ⁄ 4 7 ⁄ 8 7 ⁄ 8 7 ⁄ 8 7 ⁄ 8
5 ⁄ 32 3 ⁄ 16 5 ⁄ 32 3 ⁄ 16 7 ⁄ 32 1 ⁄ 4
1 ⁄ 4
202 1 ⁄ 2 302 1 ⁄ 2
5 ⁄ 16 5 ⁄ 16
5 ⁄ 16 3 ⁄ 16 7 ⁄ 32 5 ⁄ 16 3 ⁄ 8 1 ⁄ 4 3 ⁄ 8 1 ⁄ 4 5 ⁄ 16 5 ⁄ 16 1 ⁄ 4
203 303 403 204 304 404 305 405 505 605 406
3 ⁄ 8 3 ⁄ 8 3 ⁄ 8 1 ⁄ 2 1 ⁄ 2 1 ⁄ 2 5 ⁄ 8 5 ⁄ 8 5 ⁄ 8 5 ⁄ 8 3 ⁄ 4
1 ⁄ 4
608 1 708 1 808 1 1008 1
3 ⁄ 16 7 ⁄ 32
1 ⁄ 8
3 ⁄ 32
1 ⁄ 4
1 ⁄ 8
5 ⁄ 16
2 5 ⁄ 32 1208 1
5 ⁄ 32 3 ⁄ 16
3 ⁄ 8
609 1 1 ⁄ 8 709 1 1 ⁄ 8
3 ⁄ 16 7 ⁄ 32
3 ⁄ 8
… … … …
1 ⁄ 8
Arbor-type Cutters
Width of Face, W
Width of Face, W
Width of Face, W
Nom. Dia.of Cutter, D
Nom. Dia.of Cutter, D
Nom. Dia.of Cutter, D
Dia. of Hole, H
Dia. of Hole, H
Dia. of Hole, H
Cutter Number
Cutter Number
Cutter Number
617 817
1022 2 3 ⁄ 4 1222 2 3 ⁄ 4 1422 2 3 ⁄ 4 1622 2 3 ⁄ 4 1228 3 1 ⁄ 2
1 1 1 1 1
1628 3 1 ⁄ 2 1828 3 1 ⁄ 2 2028 3 1 ⁄ 2 2428 3 1 ⁄ 2
1 1 1 1
2 1 ⁄ 8 2 1 ⁄ 8 2 1 ⁄ 8 2 1 ⁄ 8 2 3 ⁄ 4
3 ⁄ 16
3 ⁄ 4 3 ⁄ 4 3 ⁄ 4 3 ⁄ 4
5 ⁄ 16
1 ⁄ 2
1 ⁄ 4
3 ⁄ 8
9 ⁄ 16
1017 1217 822
5 ⁄ 16
7 ⁄ 16
5 ⁄ 8 3 ⁄ 4
3 ⁄ 8 1 ⁄ 4
1 ⁄ 2 3 ⁄ 8
1
… … … …
All dimensions are given in inches. All cutters are high-speed steel. Shank type cutters are standard with right-hand cut and straight teeth. All sizes have 1 ⁄ 2 -inch diameter straight shank. Arbor type cutters have staggered teeth. For Woodruff key and key-slot dimensions, see pages 2557 through 2559 . Tolerances: Face with W for shank-type cutters: 1 ⁄ 16 - to 5 ⁄ 32 -inch face, + 0.0000, - 0.0005; 3 ⁄ 16 to 7 ⁄ 32 , - 0.0002, - 0.0007; 1 ⁄ 4 , - 0.0003, - 0.0008; 5 ⁄ 16 , - 0.0004, - 0.0009; 3 ⁄ 8 , - 0.0005, - 0.0010 inch. Face width W for arbor-type cutters; 3 ⁄ 16 inch face, - 0.0002, - 0.0007; 1 ⁄ 4 , - 0.0003, - 0.0008; 5 ⁄ 16 , - 0.0004, - 0.0009; 3 ⁄ 8 and over, - 0.0005, - 0.0010 inch. Hole size H: +0.00075, - 0.0000 inch. Diameter D for shank type cutters: 1 ⁄ 4 - through 3 ⁄ 4 -inch diameter, +0.010, +0.015, 7 ⁄ 8 through 1 1 ⁄ 8 , +0.012, +0.017; 1 1 ⁄ 4 through 1 1 ⁄ 2 , +0.015, +0.020 inch. These tolerances include an allowance for sharpening. For arbor-type cutters, diameter D is furnished 1 ⁄ 32 inch larger than listed, and a tolerance of ± 0.002 inch applies to the oversize diameter.
Copyright 2020, Industrial Press, Inc.
ebooks.industrialpress.com
Made with FlippingBook - Share PDF online