OPERATIONAL CONTROLS
Fuel Shut-off Valve (S) The fuel shut-off valve controls power unit engine. Turn the valve counterclockwise (1) to the stop to allow fuel to flow to the engine. Turn the valve clockwise (0) to the stop to shut off fuel flow to prevent fuel leakage when changing the fuel filters or when servicing the fuel system.
Weight Transfer Traction Control Select Lever (W) The weight transfer system transfers weight from the attachment to the front wheels of the power unit. Transferring weight from the attachment to the power unit increases the traction control, improves hillside maneuver- ability, aids in lifting the attachment, reduces the steering effort, and lessens the attach - ment resistance when in contact with the ground. The operator can select different transfer rates by selecting one of the five positions from no weight transfer (0) to maximum weight transfer (4). Set the weight transfer to 0 when attaching or detaching any attachment. Choke Lever (X) Pull the choke handle out to aid in starting a cold en- gine. Push the choke handle in for operation.
the flow of fuel to the
1
0
Turn off the fuel shut-off valve when transporting the power unit on a truck or trailer and when parking the power unit indoors. Circuit Breaker & Battery Disconnect (T) The circuit break/battery disconnect switch controls
power to the entire electrical system. Turn the switch to position (1) to allow power to the electrical system. Turn the switch to position (0) to disable the electrical system and allow electrical components to be serviced. Seat Prop Plate (U)
1
0
The seat prop plate secures the seat in the flipped for - ward position while service is performed under the seat. To secure, tilt the seat forward, lift up the seat prop plate, and insert the end into the wide portion of the seat plate slot. Ensure the seat prop plate snaps into the narrow portion of the slot to prevent accidental release. To release, move the seat prop plate over into the wide portion of the seat slot and tilt the seat forward. Lower the seat prop plate back into the seat box and lower the seat back down to the operating position. Seat Strap Latch (V) The seat latch strap secures the seat during transport of the power unit. To secure the seat, place the tab of the seat latch strap over the seat latch pin. Install the linch pin through the hole in the seat latch pin to secure. To release the seat so that it can be tilted forward for service, remove the linch pin and lift the tab of the seat latch strap off the seat latch pin.
Operation - 28
Made with FlippingBook - Online Brochure Maker