OPERATIONAL CONTROLS
Work Light Switch (AA) Press the top (1) of the work light switch to turn on the work lights. Press the bottom (2) of the switch to turn the work lights off. Strobe Light Switch (BB) Press the top (1) of the strobe light switch to turn on the strobe light. Press the bottom (2) of the switch to turn the strobe light off.
12 Volt Front Switches and 4-Pin Socket (FF, GG, and HH) ATTENTION The 4-pin socket is designed for use with Ventrac original equipment only. This connector is rated for 20 amp maximum current draw. The engine alternator and/or battery capacity determine allowable continuous draw.
1
2
1
2
Directional Signal Switch (CC) Press the left side (1) of the directional signal switch to turn on the left turn signal. Press the right side (2) of the directional signal switch to turn on the right turn signal. Return the switch to the middle position to turn off the signals. The left and right turn signals will override the hazard flashers. Hazard Flasher Switch (DD) Pressing the top (1) of the hazard flasher 1
The front 4-pin socket provides electrical power to attachments that are equipped with electrical controls (e.g. broom rotation actuator, snow blower discharge chute angle).
2
1
3
1
2
4
The switches turn off and on the electrical power to the front 4-pin socket.
switch flashes both of the directional turn signal lights. Press the bottom (2) of the switch to turn the hazard flasher lights off. Use of the directional turn signals will override the hazard flashers until the turn signal is turned off. Horn Switch (EE)
Press the top (1) of the rocker switch to turn on the electrical power to the 4-pin socket. Press the bottom (2) of the rocker switch to turn off the electrical power. Press and hold either the top (3) or bottom (4) mo - mentary switch to turn on the electrical power to the 4-pin socket. Release the switch to turn off the electri - cal power. Dual Front Hydraulic Auxiliary Switch (II) The optional switch handle is part of the dual front hydraulic auxiliary kit and is used to select which set of quick couplers is controlled by the secondary SDLA lever. The secondary SDLA lever operates the quick couplers with the red and yellow indicators until the button on the handle is pressed. Press and hold the button to switch the secondary SDLA lever to operate the quick couplers with the white and black indicators. Release the button to return to normal operation. Dual Front Hydraulic Auxiliary Valve (JJ) The dual front hydraulic auxiliary valve is used with attachments that are equipped with four hydraulic hoses. The valve uses a switch on the secondary SDLA lever to operate the desired set of quick couplers.
2
Press the horn switch to sound the signal horn. The horn will sound until the horn switch is released.
Operation - 29
Made with FlippingBook - Online Brochure Maker