OPERATIONAL CONTROLS
Seat Slide Lever (UU) Lift up the seat slide lever to release the seat lock. Move the seat forward or backward to the desired po- sition and release the seat slide lever to lock the seat in place. Lumbar Support Knob (VV) 1 0 2 The lumbar support knob adjusts the curvature of the backrest in either the upper or lower part of the backrest. Position 0 provides minimal support. Position 1 provides maximum curvature in the upper part of the backrest. Position 2 provides maximum curvature in the lower part of the backrest. Backrest Angle Lever (WW) 2 1 Lift up the backrest angle lever to release the backrest catch. Move the backrest to the desired position and release the backrest angle lever to lock the backrest in place. Weight Adjustment Lever (XX)
Optional Armrest Angle Knob (ZZ) The angle of the optional armrests can be adjusted individually by rotating the knob on the underside of the armrest to raise or lower the front of the armrest. Front Hitch Valve (BA) The front hitch valve is 1 2 valve counterclockwise (1) increases the speed at which the front hitch and attachment can be lowered. Turning the knob clockwise (2) decreases the speed at which the front hitch and attachment can be lowered. The front hitch and attachment can be locked in any position, so that it will not lower, by turning the front hitch valve knob clockwise until it is completely closed. When operating 3 point hitch implements, it may be helpful to lock the front hitch and attachment in a raised position, to prevent accidental lowering of the front attachment. used to control the lowering of the front hitch. Turning the knob on the front hitch
The weight setting must be adjusted with the operator sitting on the seat. The weight setting should be checked and adjusted as necessary each time the power unit is operated. Fold the weight adjust-
max.
min.
ment lever out and move it up or down to adjust the weight setting until the arrow is in the middle of the viewing window. After adjusting the weight setting, fold the adjust- ment lever completely into the locking position. Heat Switch (YY) Press the top of the heat switch to turn on the electric heating elements in the seat. Press the bottom of the heat switch to turn the heat off.
Operation - 32
Made with FlippingBook - Online Brochure Maker