SERVICE
Replacing Fuses (Rear Fuse Panel) 1. Turn the battery disconnect switch to the Off position. 2. Tilt the seat forward and fasten in place with the seat prop. 3. Remove the sealed cover (A) from the fuse panel.
Replacing the Engine Fuse or Fuse Link 1. If the power unit has been running, allow the engine to cool. 2. Turn the battery disconnect switch to the Off position. 3. Remove the right engine cover. 4. If equipped with an in-line fuse holder, remove the fuse and insert a new fuse into the holder. If equipped with a fuse link, remove the fuse link (A) from the starter and the alternator and install a new fuse link.
A
A
4.
Identify and remove the defective fuse from the socket. Refer to the Quick Reference decal under the hood for fuse locations.
5. Insert a new fuse into the socket. Be sure the fuse is the correct amperage or damage may occur to the power unit. 6. Reinstall the sealed cover onto the fuse panel and lower the seat back down to the operating position. 7. Turn the battery disconnect switch to the On position.
Engine Fuses
Position
Fuse
Circuit
80 amp fuse link or 80 amp Maxi fuse
Charge
A
5. Reinstall the right engine cover. 6. Turn the battery disconnect switch to the On position.
Service - 58
Made with FlippingBook - Online Brochure Maker