Quick Turn Springs
Quick Turn Fastener Insert Plates Insert plate directly replaces
ALL19320
10-Pack
50-Pack
the quick turn spring, allowing panels to be bolted together. May also be used as a blind nut on a panel with limited access. Inserts have 1/4"-20 threads and are typically riveted to the backside of a panel or bracket with 1/8" rivets.
1-3/8" (.090" Wire Diameter) .325" Reach
ALL19320 ALL19330 ALL19336
ALL19322 ALL19332 ALL19338
.375" Reach .425" Reach
1" (.080" Wire Diameter) .250" Reach
ALL19300 ALL19310
ALL19302 ALL19312
ALL19420 ............ 1", 2-Pack ALL19420-10 ....... 1", 10-Pack ALL19420-50....... 1", 50-Pack ALL19422 ............ 1-3/8", 2-Pack ALL19422-10 ....... 1-3/8", 10-Pack ALL19422-50 ....... 1-3/8", 50-Pack Threaded Insert Tool Kit ALL19450 Tool works with a cord- less drill to install a threaded insert into a panel or bracket. Inserts
.325" Reach
3/4" (.062" Wire Diameter) .200" Reach
ALL19296
ALL19298
Quick Turn Spring Fixture Accurately drill panels when installing quick turn fastener springs. Start with a 1/4" center hole and use the fixture to locate and drill 1/8" holes for mounting the springs. Size listed is spring center-to-center distance. ALL19406 ..... Fixture For 3/4" Spring ALL19407 ..... Fixture For 1" Spring ALL19408 ..... Fixture For 1-3/8" Spring Quick Turn Spring Adjuster ALL19405 This tool is a must when adjusting ten- sion of quick turn springs. Simply turn knob on adjuster to evenly pull or push spring without kinking or breaking spring. Clamp-On Quick Turn Fastener Brackets
ALL19407
are helpful when the backside of the panel is not easily accessible. Simply drill the correct size hole, install the threaded insert onto the mandrel, then place the insert into the hole and tighten using any cordless drill. Once the insert is compressed, reverse the drill and remove the mandrel from the insert. Kit includes mandrel and nose- piece for 1/4"-20, 5/16"-18 and 3/8"-16 inserts, other sizes available separately. Threaded inserts sold separately. Replacement Parts
ALL19452 ..... Mandrel and Nosepiece for 8-32 ALL19453 ..... Mandrel and Nosepiece for 10-24 ALL19454 ..... Mandrel and Nosepiece for 10-32 ALL19455 ..... Mandrel and Nosepiece for 1/4"-20 ALL19456 ..... Mandrel and Nosepiece for 5/16"-18 ALL19457 ..... Mandrel and Nosepiece for 3/8"-16 Threaded Inserts
These cool brackets allow you to clamp a quick turn bracket to round tubing. Allows a flush mount bracket behind a panel without grinding your powder
ALL19454
coat. Designed for use with 1-3/8" quick turn springs, insert plates or threaded nut inserts. Black anodized. ALL19430 ..... 1" ALL19433...... 1-1/2" ALL19431 ..... 1-1/4" ALL19434...... 1-5/8" ALL19432 ..... 1-3/8" ALL19435...... 1-3/4" Related Components ALL19330 ..... Quick Turn Spring 1-3/8" (Most Popular) ALL19422 ..... Quick Turn Insert Plate, 1/4"- 20 Thread ALL18547 ..... Threaded Nut Insert, Steel, 1/4"- 20 Thread ALL18548 ..... Threaded Nut Insert, Aluminum, 1/4"- 20 Thread
Steel inserts are helpful when the backside of the panel is not easily accessible. Inserts work great for frequently removed items including gauge panels, switch
panels, access panels, and body panels, or when mounting items to trailer walls. Inserts are designed for installation using insert tool ALL19450 with coordinating mandrel and nosepiece. Package of 10.
Thread Size
Pilot Hole Size
Grip Range
Body Length (Before Comp.)
Part No.
ALL19460 8-32 ALL19461 10-24 ALL19462 10-32
17/64" Up To .080" 5/16" Up To .130" 5/16" Up To .130"
.420" .475" .475" .580" .690" .690"
ALL19330
ALL19422 ALL19448 ALL19447
ALL19463 1/4"-20 13/32" Up To .165" ALL19465 5/16"-18 7/32" Up To .150"
ALL19467 3/8"-16
7/32" Up To .150"
www.allstarperformance.com
110
Made with FlippingBook flipbook maker