Rod Ends Two-piece spherical rod ends have a pivoting steel ball and are sold each. Bore x Thread RH Male LH Male RH Female Strength Standard Series Steel 1/4" x 1/4"-28 ALL58004 ALL58014 ALL58034 2,835 Lbs 5/16" x 5/16"-24 ALL58005 ALL58015 ALL58035 4,517 Lbs 3/8" x 3/8"-24 ALL58006 ALL58016 ALL58036 6,323 Lbs 1/2" x 1/2"-20 ALL58008 ALL58018 ALL58038 10,046 Lbs 5/8" x 5/8"-18 ALL58010 ALL58020 ALL58040 15,488 Lbs 3/4" x 3/4"-16 ALL58012 ALL58022 ALL58042 15,894 Lbs 3/4" x 3/4"-16 ALL58013 † – – 15,894 Lbs Pro Series Steel (Moly) – Black 1/2" x 1/2"-20 ALL58058 ALL58068 – 17,000 Lbs 1/2" x 5/8"-18 ALL58059 ALL58069 – 19,300 Lbs 5/8" x 5/8"-18 ALL58060 ALL58070 – 18,000 Lbs 3/4" x 3/4"-16 ALL58062 ALL58072 – 25,000 Lbs Pro Series Steel (Moly) – Black (PTFE Lined) 1/2" x 5/8"-18 ALL58079 ALL58084 – 17,650 Lbs 5/8" x 5/8"-18 ALL58080 ALL58085 – 15,200 Lbs 3/4" x 3/4"-16 ALL58082 ALL58086 – 21,400 Lbs Aluminum – Black 1/2" x 1/2"-20 ALL58088 ALL58098 – 7,700 Lbs 1/2" x 5/8"-18 ALL58089 ALL58099 – 15,000 Lbs †ALL58013 has an oversized hole and is for use with steering shaft tubing. Heavy Duty 3/4" Chrome Moly Rod Ends Often referred to as “Aircraft-Style”, these heavy duty 4130 chrome moly rod ends have larger bodies, making them thirty percent stronger than standard 3/4" rod ends. These rod ends are commonly used on Panhard bars and lower strut rods. ALL99314 ..... RH Male, 3/4" x 3/4"-16 ALL99315 ..... RH Female, 3/4" x 3/4"-16 3/4" Solid Rod End ALL58112 Solid rod ends are built using 1045 steel and are then chrome plated for added wear resistance. End has a body width of .875" to match the width of standard rod ends. ALL99314 Bolt Center Caps ALL10678 Caps slip over the head of standard 1/2" bolts to accurately measure the center-to-center length of installed suspension tube assemblies. Machined step secures the end of a standard tape measure for easy reading of the length to the center of the opposite cap. Caps feature a built-in O-ring that allows the cap to swivel on the bolt head and keeps it from falling off. Package of 2.
Steel Shock Quick Pin ALL60108 Steel shock quick pins allow coil-over shocks to be quickly serviced or changed. Works with Allstar coil-over brackets, eliminating the need for a separate bushing. Shock quick pins are 2-1/2" long and include a hairpin. Sold each. Titanium Shock Quick Pins Titanium shock quick pins allow coil-over shocks to be quickly serviced or changed. ALL17120 has a long shoulder and will work with Allstar coil-over brackets, eliminating the need for a separate bushing. ALL17121 is commonly used on non-bushing type brackets, but can be used with Allstar brackets along with bushing. Shock quick pins are 2-1/2" long and include a hairpin.
ALL17120
ALL17121
ALL17120...... Quick Pin With Shoulder ALL17121...... Quick Pin Without Shoulder
Quick Release T-Handle Pins
Positive lock quick release pins hold tightly in place until the handle button is depressed, allowing the pin to be inserted or
ALL60314
removed into or out of a hole with ease. Handles are made from die cast 380 aluminum, shanks are made from 4130 steel. Each pin is equipped with a stainless steel split ring to allow the attachment of a cable assembly. ALL60300..... 1/4" x 1" ALL60314..... 3/8" x 3" ALL60301..... 1/4" x 1-1/2" ALL60318..... 1/2" x 2" ALL60302..... 1/4" x 2" ALL60320..... 1/2" x 2-1/2" ALL60304..... 5/16" x 1" ALL60322..... 1/2" x 3" ALL60306..... 5/16" x 2" ALL60324..... 1/2" x 3-1/2" ALL60308..... 5/16" x 3" ALL60326..... 5/8" x 2" ALL60310 ..... 3/8" x 1" ALL60328..... 5/8" x 2-1/2" ALL60312 ..... 3/8" x 2" ALL60330 .... 5/8" x 3" Quick Pin Lock Collar Steel lock collar provides a positive lock for
Lengths stated are from base of T-handle to top of detent ball.
ALL99315
ALL60335
quick release pins. Black coated collar with button head machine screw allows attachment of a securing device, like an Allstar lanyard (ALL18461 or ALL18463). ALL60335..... 1/2" Collar With 10-32 Screw ALL60336..... 5/8" Collar With 1/4"-28 Screw
www.allstarperformance.com
117
Made with FlippingBook flipbook maker