Air Filter Cleaner ALL78222 Spray solution directly onto dirty air filter. Allow a brief time to soak, 5-10 minutes then rinse clean with water. For use with Allstar washable air filter elements. Plastic 24 oz. bottle.
Carb Hats Carburetor hats are ideal to cover open carbs and prevent debris from falling into the engine while working in garage or pit area while the air
ALL26040
ALL26042
cleaner is removed. 2-1/2" tall carb hats are designed to fit most carbs or throttle bodies with a 5-1/8" diameter neck. ALL26040..... Plastic Carb Hat ALL26042..... Plastic Carb Hat With Screen ALL26043..... Aluminum Carb Hat, Standard Spun Aluminum ALL26044 .... Aluminum Carb Hat, Deluxe Machined Aluminum With Sealing O-Ring Note: Hats will not clear choke linkage or shaft on Holley style carbs but will clear choke horn with choke linkage and shaft removed. ALL26043 ALL26044
Filter Cleaning Station ALL26009
Filter cleaning station simplifies and speeds up the process of servicing 14" washable air filters. Spray air filter with a cleaner/
degreaser as recommended by filter manu- facturer. Allow a brief time to soak and then flush clean with a garden hose. Allow filter to dry completely then apply an even application of filter oil, if applicable. For use with wash- able filter elements only.
Dominator Carb Hat ALL26041 Plastic carb hat is 2-3/8" tall and fits over the 7-1/4" air cleaner opening of Holley Dominator carburetors to prevent water or debris from entering the engine. Solid cover may be drilled when an air cleaner stud is used. Sprint Car Wash Plug Set Aluminum plugs have O-rings for a watertight seal and will keep dirt out of injectors while cleaning sprint car. 4-piece set comes with a nylon storage pouch.
Breathers Shielded or non-shielded clamp-on breathers will fit valve cover tubes. Non-Shielded
ALL36202..... 1-1/2" ALL36204..... 1-3/8" Shielded
ALL36203..... 1-1/2" ALL36205..... 1-3/8" Breather Sock ALL36208
The breather sock fits over standard 3" diameter, 2-1/2" tall valve cover breathers to help catch residual oil discharged from the engine through valve cover breathers. A practical alternative to wrapping dirty shop rags around valve cover breathers! Socks are easily cleaned with a mild detergent. Breather Filters Mesh filters add another layer of protection against dirt, dust and debris. Fits 3" diam- eter breathers typically used on valve covers, breather tanks and helmet systems. ALL26227..... Fits Non-Shielded Breathers ALL26228..... Fits Shielded Breathers Related Parts ALL36202..... Non-Shielded Breather, 1-1/2" ALL36203..... Shielded Breather, 1-1/2" ALL36204..... Non-Shielded Breather, 1-3/8" ALL36205..... Shielded Breather, 1-3/8" Breather Cover ALL26232 Water-repellent cover fits 3" diameter breathers commonly found on valve covers, breather tanks and helmet systems. Cover with drawstring fits both shielded and non- shielded breathers.
ALL26072
Part No.
Size Wash Plug Dia.
Stack Dia.
Kinsler
ALL26072 ALL26073 ALL26074 ALL26075 ALL26076 ALL26033 ALL26035 ALL26036 ALL26038
2-1/4"
2.328" 2.762" 2.848" 2.921" 2.973" 2.632" 2.885" 2.973" 3.073"
2.335" 2.790" 2.875" 2.950"
2-11/16"
2-3/4"
2-13/16"
2.90"
3.00"
Engler
2-1/2"
2.650" 2.905"
2-13/16"
2.90"
3.00" 3.10"
3"
Hilborn
ALL26032
2-7/16"
2.483"
2.50"
Air Pans Lightweight aluminum air pans fit between the carburetor and cowl area to keep engine heat away from and direct cool air to the carburetor. Cooler intake air means extra horse- power. Carb mounting flange is uncut. ALL26100 ..... Stepped Plenum ALL26101 ..... Flat Plenum
ALL26100
ALL26101
www.allstarperformance.com
10
Made with FlippingBook flipbook maker