Bleeder Fitting With Screw ALL50180 Designed for popular aftermarket calipers, these fittings have 1/8"-27 threads and include a 1/4"-28 bleeder screw. Sold in a pack of 4.
Bolt-In Adapter Fittings Bulkhead style aluminum fittings adapt 3/16" inverted flare line to an AN type fitting. The 9/16" threaded body with attaching nut can be mounted through a C-channel style frame or a chassis tab. ALL50104..... 3/16" To 3AN ALL50105 ..... 3/16" To 4AN ALL60092..... Weld-On Tabs, 4-Pack Clip-In Adapter Fittings Steel adapter fittings provide a bulkhead style connection to AN lines that can be mounted directly to the chassis by using tabs or brackets and retainer clips. Fittings fit in a 5/8" hole and are sold in a pack of 2.
Bleeder Caps ALL50855 Rubber caps keep dirt and moisture out of brake caliper bleeder screw fittings. Caps fit ALL50180 and most other popular small bleeder screws. Package of 10.
ALL60092
Inverted Flare Fittings An inverted flare fitting is a common brake fitting designed to withstand the high pressures found in braking systems.
ALL50100..... 3/16" Inverted Flare To -3AN ALL50101 ..... 3/16" Inverted Flare To -4AN
ALL50150
ALL50102 ..... 1/8"-27NPT To -3AN ALL50103 ..... 1/8"-27NPT To -4AN ALL60029..... Bolt-on Tabs 2-Pack ALL60030..... Weld-on Tabs 4-Pack ALL50150 ..... Retainer Clip 4-Pack
ALL60029
ALL60030
ALL50120 ALL50121
ALL50183
ALL50125
ALL50127
TECH TIP
Installation Reference Braided Steel Line
Brake Line Clip ALL50150
Rigid Brake Line
ALL50130 ALL50131 ALL50132 ALL50133
ALL50136 ALL50137
-3AN Or -4AN To 3/16" Brake Line Adapter ALL50100 (-3AN) ALL50101 (-4AN)
ALL50135
Mounting Tab ALL60029 Or ALL60030
ALL50120 ..... 3/16" To Male 1/8"-27NPT Straight, 4-Pack ALL50125 ..... 3/16" To Male 1/8"-27NPT 90°, 4-Pack ALL50127 ..... 3/16" To Female 1/8"-27NPT, 4-Pack ALL50136 ..... 3/16" Tee, 2-Pack ALL50137 ..... 3/16" Tee w/1/8"-27NPT Port ALL50135 ..... 3/16" Tee w/1/8"-27NPT Male Nipple On Side ALL50183 ..... 3/16" Plug, 4-Pack ALL50130 ..... 3/16" Union, 4-Pack ALL50121 ..... 1/4" To 1/8"-27NPT Straight, 4-Pack
D.O.T. Legal Brake Hose Kits
Kit includes everything neces- sary to complete the connection
between 3/16" steel brake line and the brake caliper for one axle. Kits include two brake line adapter fittings, steel weld on tabs,
ALL50129 ..... 1/4" To 5/16", 2-Pack ALL50131 ..... 1/4" Union, 4-Pack ALL50132 ..... 5/16" Union, 4-Pack ALL50133 ..... 3/8" Union, 4-Pack Master Cylinder Adapter Fittings ALL41012
retainer clips, banjo caliper fittings, banjo bolts, crush washers, and 16" DOT approved #3 braided steel hoses. ALL42032 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts ALL42033 ..... Big GM Kit With 7/16"-20 Caliper Bolts
Fittings adapt master cylinders or combination valves with 1/2"-20 and 9/16"-18 ports to accept 3/16" inverted flare brake line with standard 3/8"-24 fittings. Kit includes one of each fitting.
Brake Hose Kits Kit includes everything neces- sary to complete the connection between 3/16" steel brake line and
the brake caliper for one axle. Kits include two brake line adapter fittings, steel weld on tabs, retainer clips, banjo caliper fittings, banjo bolts, crush washers, and 15" #3 braided steel hoses. ALL42025 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts ALL42027 ..... Big GM Kit With 7/16"-20 Caliper Bolts
WARNING: PROP. 65 The products on this page can expose you to lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov
www.allstarperformance.com
123
Made with FlippingBook flipbook maker