Clutch Line Kits Designed to connect clutch master cylinder to hydraulic throw-out bearing or directly to transmissions with internal clutches. Pre-assembled
Dirt Race Car Brake Line Kit Kit allows braided lines to be run throughout a dirt race car. Includes all lines needed to reach from the calipers to inside the foot box. Due to brand preference and location of pedals, master cylinders and brake shut off, the specific fittings and lines to complete plumbing inside the foot box area will need to be purchased separately. Concerned about brake pressure? This kit uses #3 line size for stiffer pedal feel while utilizing the more popular -4AN ends. ALL42052..... Kit For Dirt Modifieds With OEM Calipers ALL42053..... Kit For Dirt Modifieds With Aftermarket Calipers ALL42054..... Kit For Dirt Late Models With Aftermarket Calipers Rear End Brake Line Kit (Single Line Drop) Kit is designed to eliminate “hanging” brake lines near the rear calipers. Rear brake line kits utilize a single line drop located near the left side of the center section. From the drop, the lines tee and run over the top backside of the center sec- tion, then across the backside of axle tubes to the calipers. Kit includes braided lines (#3 line with -4AN ends), -4AN tee, 3" axle tube clamp bracket and a tee bracket. ALL42056... Kit For Dirt Modifieds (60" Wide) With OEM Calipers ALL42057... Kit For Dirt Modifieds (60" Wide) W/Aftermarket Calipers ALL42058... Kit For Dirt Late Models (62" Wide) W/Aftermarket Calipers the front calipers to inside the foot box. Braided lines are #3 size with -4AN ends. The #3 line size offers a stiffer pedal feel while utilizing the more popular -4AN ends. ALL42060..... Kit For Dirt Modifieds With OEM Calipers ALL42061 ..... Kit For Dirt Modifieds With Aftermarket Calipers ALL42062..... Kit For Dirt Late Model With Aftermarket Calipers Note: Visit our website for specific components used in these kits! Gauge Line Kits Front End Brake Line Kit Kits include braided lines to reach from
braided steel hose assemblies have #3 lines and are fitted with one -3AN straight end and one 3/16" inverted flare 90° hard line end. Also includes one 1/8" male to -3AN fitting (ALL50000). ALL46100-24....Kit With 24" Line ALL46100-36....Kit With 36" Line ALL46100-48 ...Kit With 48" Line Universal Clutch Line Kit ALL46101-36
Universal kit includes a variety of fittings to connect most master cylinders to a hydraulic slave cylinder, throw-out bearing
or to an internal clutch transmission including Bert and Brinn style
transmissions. Kit includes an 8" long 3/16" hard line, one each of
straight and 90° male 1/8"NPT to 3/16" inverted flare fit- tings, one straight female 1/8"NPT to 3/16" inverted flare fitting, two straight male 1/8"NPT to -4AN hose fittings, a 36" #4 braided steel hose with -4 straight fittings and line clamps for the steel and braided line.
D.O.T. Legal Brake Hose Kits
Kit includes everything neces- sary to complete the connection between 3/16" steel brake line and the brake caliper for one axle. Kits
include two brake line adapter fittings, steel weld on tabs, retainer clips, banjo caliper fittings, banjo bolts, crush washers, and 16" DOT approved #3 braided steel hoses. ALL42032 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts ALL42033 ..... Big GM Kit With 7/16"-20 Caliper Bolts
Gauge line kits provide easy con- nection to most mechanical oil and fuel pressure gauges. Includes a pre-assembled length of #4 braided steel line with -4AN ends and male and female 1/8"NPT adapters to work with most applications. ALL46110-36 ....... Kit With 36" Line ALL46110-48....... Kit With 48" Line ALL46110-60....... Kit With 60" Line ALL46110-72 ....... Kit With 72" Line
Brake Hose Kits Kit includes everything
necessary to complete the connection between 3/16" steel brake line and the brake caliper for one axle. Kits include two brake line adapter fittings, steel weld on tabs, retainer clips, banjo caliper fittings, banjo bolts, crush washers, and 15" #3 braided steel hoses. ALL42025 ..... GM Metric Kit With 10mm-1.50 Caliper Bolts ALL42027 ..... Big GM Kit With 7/16"-20 Caliper Bolts
www.allstarperformance.com
127
Made with FlippingBook flipbook maker