Ford 9" Axle Housing Seals Internal seals prevent gear lube from leaking into axle tube to eliminate premature rear end failure. Seal housings are O-ring type with spring-loaded seals. For use with 3" O.D. axle tubes and most 31-spline axles. Measure I.D. of tube for proper fit.
Axles
Allstar Axles fit most quick change and Ford 9" rears. Available in solid 28- or 31-spline or lightweight, gun- drilled 31-spline styles. Use with 24-spline drive flanges. Length 28-Spline Solid 31-Spline Gun-Drilled 31-Spline Solid 26-1/2" – ALL66265 ALL66266 27" – ALL66270 ALL66271 27-1/2" ALL67276 ALL66275 ALL66276 28" ALL67281 ALL66280 ALL66281 28-1/2" ALL67286 ALL66285 ALL66286 29" ALL67291 ALL66290 ALL66291 29-1/2" ALL67296 ALL66295 ALL66296 30" ALL67301 ALL66300 ALL66301 30-1/2" ALL67306 ALL66305 ALL66306 31" ALL67311 ALL66310 ALL66311 31-1/2" ALL67316 ALL66315 ALL66316 32" ALL67321 ALL66320 ALL66321 32-1/2" ALL67326 ALL66325 ALL66326 33" ALL67331 ALL66330 ALL66331 33-1/2" ALL67336 ALL66335 ALL66336 34" – ALL66340 ALL66341 34-1/2" – ALL66345 ALL66346 35" – ALL66350 ALL66351 35-1/2" – ALL66355 ALL66356 36" – ALL66360 ALL66361 36-1/2" – ALL66365 ALL66366 37" – ALL66370 ALL66371 37-1/2" – ALL66375 ALL66376 38" – ALL66380 ALL66381 38-1/2" – ALL66385 ALL66386 39" – ALL66390 ALL66391 39-1/2" – ALL66395 ALL66396 40" – ALL66400 ALL66401 Axle Spline Tool ALL66104
ALL72100* ... 2.625" O.D. Fits 3/16" Wall, 3" Tube, Red ALL72102 ..... 2.562" O.D. Fits 7/32" Wall, 3" Tube, Blue ALL72104 ..... 2.500" O.D. Fits 1/4" Wall, 3" Tube, Gold Replacement Parts
ALL72101 ..... O-Rings For ALL72100, 3-Pack ALL72103 ..... O-Rings For ALL72102, 3-Pack ALL72105 ..... O-Rings For ALL72104, 3-Pack ALL72108 ..... Inner Seal *Use with Allstar steel and aluminum axle tubes. Universal Ford 9" Axle Housing Seal ALL72099 Place seal inside the axle tube near the center section to keep rear end lube in the center section area of most floating axle style rear end housings. Universal seal
works with most 3" O.D. axle tubes, regardless of wall thickness. Internal seal diameter of .975" works with most 28- and 31-spline axles.
Inner Axle Snout Seal ALL72142 Seal is pressed into the outer end of a 5x5 axle tube snout (2.5") to help prevent differential lube
from entering the outer wheel bearing area and contami- nating the wheel bearing grease. Seal has an outer diameter of 1.875" and an inner diameter of approximately 1.325".
Tool clamps in a vise to hold 31-spline axles for mainte- nance or installation of axle plugs. Assures perfect spline alignment when installing lock-up plugs used with locker style differentials. Aluminum Axle Plug ALL66100
T-Handle Axle Puller ALL66115 All-in-one T-handle puller threads into axle for easy installation or removal. Tool
includes adapters to fit 3/8"-16 coarse or 3/8"-24 fine thread solid axles, and 3/4"-16 fine thread gun-drilled axles.
Axle plug threads into the end of a gun-drilled Allstar, Ford 9", or quick change axle to keep rear end lube out of the axles. 3/8"-24 internal thread for correct axle spacing. Extreme Pressure Lube ALL78246 Originally used throughout the tool and
die industry, this lube provides superior durability and wear protection, taking the place
of anti-seize in many applications. Recommended for spline-to-spline contact, threaded adjusters and engine fasteners. 4 ounce tube.
Todd Sherman
Photo: Marcus Berglund
www.allstarperformance.com
147
Made with FlippingBook flipbook maker