Step Drill Sets Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact, deburr and chamfer while drilling and do not require a center punch. Titanium nitride coated high speed steel. 1/4" shank. Drill Bit Sizes ALL11040 (3-Piece Set) Six Step
Aluminum Panels Universal panels have many uses around the shop or at the track. Panels work well when fabricating spoiler sides, interior panels or on uneven pit areas as a floor jack plate. 24" x 48".
ALL22236..... 0.063" Thick ALL22237..... 0.090" Thick ALL22238..... 0.125" Thick
ALL11041
Diamond Plate Aluminum ALL22240 4' x 8' sheets are .063" thick and provide an attractive, shiny, non-slip finish for trailer floors, steps, etc.
3/16", 1/4", 5/16", 3/8", 7/16", 1/2" Nine Step 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Thirteen Step 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" ALL11041 (2-Piece Set) Eleven Step 1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", 1-7/32", 1-1/4", 1-3/8" Twelve Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"
Aluminum And Diamond Plate Shipped Freight Truck, Six Sheet Minimum and Surcharge For A Shipping Pallet.
Cleco Pin Fastener Kits Cleco pins are reusable and easily make a temporary connec- tion between pieces of sheet metal during fitting. Pins will work with thick- nesses up to 1/4". Kits include pliers and 10 pins. ALL18221 ..... Kits with 1/8" Pins ALL18225 ..... Kit With 3/16" Pins Deluxe Air Rivet Gun ALL18207 Heavy duty air rivet gun can be used with steel or aluminum rivets from 3/32" to 3/16". Replacement Part ALL18209 ..... Replacement Jaws for ALL18207
Steel Plate Steel plate is useful for many building projects or fabricating brackets. 10 gauge (1/8" thick) 1011
mild steel plate is ideal for adding a protective cover to the driver’s side floor or door bar area of circle track cars.
ALL54070..... 18" x 26" ALL54071..... 24" x 24" ALL54072..... 24" x 36"
Stainless Wire Screen Use screen to protect radiators, oil coolers or other items. Size referenced is the approximate opening of the screen. 5/64" (.025" Wire Diameter)
ALL22260..... 12" x 36" ALL22262..... 36" x 36" 1/8" (.035" Wire Diameter) ALL22265..... 12" x 36" ALL22267..... 36" x 36" ALL22268..... 36" x 48" 3/16" (.047" Wire Diameter)
5/64"
1/8"
Punch And Flare Tools Add strength and a smooth finish to hole edges. Unique tools can be used to punch and flare new holes, or to flare existing holes. Starting with a small center hole, the punch halves bolt together to cut and flare at the same time. Note: This tool will cut a hole in up to 20 gauge (.0359") steel or 18 gauge (.0403") aluminum. Hole size is increased about 1/8" when hole is flared. ALL11070...... 1-1/2" ALL11075 ...... 2-1/2" ALL11072...... 1-3/4" ALL11076 ...... 2-5/8" ALL11074...... 2" ALL11078 ...... 3"
ALL22270..... 12" x 36" ALL22272..... 36" x 36" ALL22273..... 36" x 48"
3/16"
Steel Wire Screen Electrically welded steel screen is used for a variety of applications when additional protection is needed. Screen is 2' x 2', constructed of .080" diameter wire and galvanized for corrosion resistance.
ALL22276..... 1" x 1" ALL22277..... 1" x 2"
www.allstarperformance.com
13
Made with FlippingBook flipbook maker