Ring And Pinion Gear Sets
Dial Indicator With Magnetic Base ALL96414 Dial indicator with magnetic base is a necessity when degreeing a camshaft, checking crankshaft end play, deck heights, dome heights, transmission end play or ring and pinion backlash. Universal magnetic base may be mounted anywhere. Shockproof dial indicator has 1" of travel in .001" increments. Base and dial indicator may
Quality differential components are suitable for race, street and off-road use. Lapped in matched sets for quiet operation.
GM 7.5" Sets fit 10-bolt with 7.5" ring gear, 1.438" diameter pinion stem and 27-spline pinion. Part No. Ratio Tooth Part No.
also be purchased separately. ALL96415 ..... Dial Indicator Only ALL96416..... Magnetic Base Only
Ratio Tooth
ALL70110* 3.23 ALL70112* 3.42
42-13 ALL70115 †
3.73
41-11 41-10 41-10
41-12 ALL70116* 4.10
3.42
41-12 ALL70117 †
4.10
ALL70113 †
Digital Calipers 0-6" With Case ALL96411 Measure inside, outside
ALL70114* 3.73 41-9 *Set includes standard width ring gear for use with 3.23 and numerically higher ratio carriers or when using 3.08 and numerically lower ratio carriers and ALL70100 spacer. †Set includes thick ring gear for use with 3.08 and numerically lower ratio carriers. GM 8.5" Sets fit 10-bolt with 8.5" ring gear, 1.625" diameter pinion stem and 30-spline pinion. Part No. Ratio Tooth Part No. Ratio Tooth ALL70120 3.08 40-13 ALL70126 4.10 41-10 ALL70122 3.42 41-12 ALL70128 4.56 41-9 ALL70124 3.73 41-11 Ford 9" Sets fit 10-bolt with 9" ring gear, 1.313" diameter pinion stem and 28-spline pinion. Part No. Ratio Tooth Part No. Ratio Tooth ALL70010 3.50 35-10 ALL70028 5.14 36-7 ALL70012 3.70 37-10 ALL70030 5.29 37-7 ALL70014 3.89 35-9 ALL70032 5.43 38-7 ALL70016 4.11 37-9 ALL70034 5.67 34-6 ALL70018 4.30 39-9 ALL70036 5.83 35-6 ALL70020 4.56 41-9 ALL70038 6.00 30-5 ALL70022 4.71 33-7 ALL70040 6.20 31-5 ALL70024 4.86 34-7 ALL70042 6.33 38-6 ALL70026 5.00 30-6 ALL70044 6.50 39-6 GM 7.5" Ring Gear Spacer ALL70100 41-11 ALL70118* 4.56
and depth dimensions with easy to read Metric or SAE LCD display,
in .001" increments up to 6". On/off switch conserves battery and zero setting assures accurate readings. Plastic case provides additional battery storage.
Dial Caliper ALL96410
Quality hardened stainless steel dial caliper is shockproof and capable of measuring items from .001" to 6" in increments of .001". Includes protective carrying case.
Spacer allows installation of 3.23 and numerically higher ratio gear sets with standard thickness ring gears into
Andy Bozell
Photo: RW Motorsports
3.08 and numerically lower carriers. Steel spacer is .3125" thick and includes ten 7/16"-20 x 1-1/4" UHL LH bolts.
Gear Marking Compound Kit ALL78250
Gear marking compound kit is a good way to identify correct NEW!
gear contact area when installing or adjusting ring and pinion gear sets. Kit includes gear marking compound and application brush.
Phil Bozell
Photo: RW Motorsports
www.allstarperformance.com
151
Made with FlippingBook flipbook maker