Drain Pan ALL40112 Round drain pan has molded in handles and pour spout. Made from chemical and solvent resistant plastic. 13-1/2" x 11" x 4", 7 quart capacity. Shop Towels ALL12006 Shop towels are much heavier than standard paper towels and work great for numerous tasks around the shop or track. Rolls contain 60 indi- vidually perforated 11" x 9-1/2" dispos- able sheets.
Combo Remote Fill Tank ALL36134 Aluminum fill tank features a pre-drilled 4-1/2" square mounting flange for securing tank to the underside of deck panel, providing an easy-access fill loca- tion for rear end/differential, transmission, power steering, or dry sump tank. Tank has
a raised non-vented cap and a -10AN male lower hose fitting. Tank also has a 3/8"NPT side port for a return or vent, and a separate 3/8"NPT fitting with an integrated foam filter for an additional vent.
Remote Fill Tanks Aluminum tanks feature a 5-3/8" mounting flange to
Drain Pan ALL14171 Drain pan with built-in pump holds and refills fluids when
mount in a deck panel or other flat horizontal panel, providing an easy access fill location for rear end/differentials, transmis- sions or dry sump tanks. Tanks have a raised, vented twist on cap and a -10AN male hose con- nection. Overall tank height is 9" x 3" in diameter. ALL36113 ALL36111
changing rear end gears. Molded plastic basin and lid slide together to prevent spilling of fluid. A crank handle
is included for hand operation along with a length of straight hex shaft for use with an electric drill. 16" square x 7" tall. 14 quart capacity.
Aluminum Quick Change Drain Pan ALL14166 Aluminum drain pan is handy when changing quick change gears. Built-in perforated shelf holds gears and allows lube to drain into pan. Pan is 10-1/4" wide, 12" long and 3-3/4" deep. Plastic Quick Change Drain Pan ALL14356 Tapered top drain pan, com- bined with an open flow corner,
Screw-In Fitting
One-Piece Flange
Weld-In Fitting
Weld-On Flange
ALL36113
ALL36113
ALL36110 ALL36111
ALL36110 ALL36111
ALL36113 ..... Fill Tank, Economy ALL36110 ..... Fill Tank ALL36111...... Fill Tank With 3/8"NPT Bung ALL36124 ..... Replacement Cap Mini Breather Tanks Small capacity spun aluminum tanks can be used to vent transmission or rear end to prevent lubricant from being forced out. Tanks are complete with 1/4"NPT bung at bottom and bracket for mounting to chassis tubing. ALL36140 ..... Tank For 1-1/2" Dia. Tubing ALL36141 ..... Tank For To 1-3/4" Dia. Tubing ALL36142 ..... Tank With Flat Mount NEW! Mini Breather ALL36145 Compact breather mounts in a deck or bracket with a 7/16" hole and has a -4AN male end making it ideal for venting transmissions or rear ends. Clamp-On Mini Breathers Breathers mount easily to either 1-1/2" or 1-3/4"
allow quick change gear changes to happen even faster. Plastic low profile, 2-piece pan includes a stainless steel filter screen molded into the top tray.
Drain Plug Kits Drain plug kits include a machined weld-on bung that has a step added to fit inside a drilled hole for easy installation. Kits are perfect when adding drain plugs to oil pans, rear end housings, dry sump tanks, etc. Size
tubing. Breathers are 1" tall and 1-3/8" in diameter. Great for use on transmis- sions, differentials, etc. Bottom fitting is 1/4"NPT. Black anodized finish. ALL36106..... Breather For 1-1/2" Tubing ALL36107 ..... Breather For 1-3/4" Tubing ALL36103 ..... Replacement Filter Only
Aluminum Bung Steel Bung
3/8"NPT 1/2"NPT
ALL50732 ALL50734
ALL50733 ALL50735
www.allstarperformance.com
155
Made with FlippingBook flipbook maker