Fire Extinguishers Hand held dry chemical fire extin- guishers are perfect for race car, trailer or garage use and include steel mounting bracket and strap, aluminum nozzle and hairpin safety pin. ABC rated, mono-ammonium phosphate based extinguishers are effec- tive against electrical, liquid, grease, wood or paper fires. USCG approved when used with included mounting bracket and
Torque Tube Belt ALL10181 Universal strap keeps
torque tube stabilized and centered in case of coupler or tube failure. Black, 3" wide belt fits all torque tube and chassis combinations.
Torque Ball Safety Blanket ALL55220 Fire resistant safety blanket designed by Jason Meyers Racing protects drivers legs and feet in the event of a U-joint failure. Ballistic nylon covered blanket weighs just 1-1/2 lbs.
ALL10500
ALL10502
retaining strap to secure extinguisher to bracket. ALL10500 ..... 2.5 Lb., (3-3/8" dia. x 14-1/2" Tall) ALL10502 ..... 5 Lb., (4-3/8" dia. x 17-1/2" Tall) Quick Release Fire Extinguisher Bracket ALL10510 Bracket keeps fire extinguisher
and has quick release adjustable straps that allow blanket to be removed easily for servicing torque ball and U-joint. Blanket includes two mounting brackets, mounting studs, nuts and installation instructions. Replacement Parts
secure and allows quick access by pulling pin. Bracket mounts most 2-1/2 lb. extinguishers with an O.D. up to 3-1/2" to round tubing with supplied clamps or fastens to a flat panel including trailer or shop walls. Quick Release NHRA Fire Extinguisher Brackets
ALL55224 ..... 3/8" Mounting Stud Kit ALL55226 ..... Mounting Tabs, 1-Pair
Engine Diaper ALL69011
Engine diaper will help contain engine oil and fragments if an engine failure occurs. Increase safety and reduce the chance of control loss due to
NHRA approved bracket keeps fire extinguisher secure and allows quick access by pulling pin. Bracket
NEW SIZE!
debris on the racing surface. Diaper wraps around oil pan and secures to header bolts. Diaper is NHRA approved but is not designed for vehicles that require SFI approved diapers. Diaper features a sewn-in, non-replaceable oil absorbent pad and is 23" long x 12-1/2" high x 12" wide. Replacement Parts
AL10513
mounts most 2-1/2 lb. extinguishers to 1-1/2"- 1-3/4" round tubing with supplied 3/4" wide stainless t-bolt bands or fastens to a flat panel. AL10512 ....... Bracket For 3" O.D. Extinguisher AL10513 ....... Bracket For 3-3/8" O.D. Extinguisher NEW! Shifter Boot ALL54130
ALL99043..... Replacement Tabs, 4-Pack ALL99347..... Replacement Buckle, 1 Set ALL69013 ..... Engine Diaper Pad, 22" x 30"
Fire resistant, black, thermal boot helps pre- vent fire from entering driver compartment. Boot is 7" tall with Velcro strap closure at top. Base is 6" x 7". Used by many top Cup, xfinity, Truck, CRA and Late Model teams.
Transmission Blanket ALL69010
Sprint Drag Link Tether ALL10252
Keeps drag link tethered to the chassis if it becomes disconnected. Tethering of drag link is required by most sanctioning bodies. 24" L x 1" W, woven nylon.
Contains transmission explosions on high horsepower race cars with stock firewall/floor pan or where a transmission shield isn’t practical. NHRA and IHRA approved blanket measures 12" x 47" and meets SFI 4.1 specifications. Includes straps to secure it to most transmissions.
www.allstarperformance.com
161
Made with FlippingBook flipbook maker