Sprint Car Dry Sump Tank Mounting Brackets Mounting brackets are designed to mount 6" diameter tanks to the left front corner of standard small block Chevy engines. Commonly mounted with ALL38145 sprint motor plate, the upper
Sprint Car Wash Plug Set Aluminum plugs have O-rings for a watertight seal and will keep dirt out of injectors while cleaning sprint car. 4-piece set comes with a nylon storage pouch.
ALL36092
ALL36093
bracket utilizes the water pump mounting holes and the lower bracket fastens to the early front engine mount mounting hole.
ALL26072
Part No.
Size Wash Plug Dia.
Stack Dia.
Kinsler
ALL26072 ALL26073 ALL26074 ALL26075 ALL26076 ALL26033 ALL26035 ALL26036 ALL26038
2-1/4"
2.328" 2.762" 2.848" 2.921" 2.973" 2.632" 2.885" 2.973" 3.073"
2.335" 2.790" 2.875" 2.950"
ALL36092..... Upper Tank Mount ALL36093..... Lower Tank Mount
2-11/16"
2-3/4"
2-13/16"
2.90"
3.00"
Heating Pads High temperature silicone heating pads
Engler
2-1/2"
2.650" 2.905"
ALL76422
2-13/16"
2.90"
3.00" 3.10"
externally preheat oil in wet sump oil pans, dry sump tanks and automatic transmission pans reducing overall warm up time and improving lubrication during initial start up. 3" cord, 120-volt operation.
3"
Hilborn
ALL26032
2-7/16"
2.483"
2.50"
ALL76420 ..... 2"x15", Self Adhesive Pad, 200W ALL76422..... 5"x7", Self Adhesive Pad, 375W
Compact Electric Fuel Pump ALL40320
ALL76424 ..... 6"x12", Velcro Strapped Pad For 6" O.D. Tanks, 435W WARNING! Do not plug heater in without being installed on tank or metallic surface to absorb heat. Element heats up quickly and damage will result.
High flow, low pressure elec- tric fuel pump equipped with a
5/16" inlet/outlet. The pump flows 18 gph at 4.0 psi, 5.5 psi maximum. Includes a rubber padded mounting bracket and two heavy duty hose clamps. Rated 12V/5 amps. Overall length is 5-1/2" x 1-1/2" wide.
Immersion Heaters Immersion style heater preheats oil in wet sump oil pan or dry sump tanks to reduce overall warm up time and improve lubrication during
Fuel Pressure Gauge ALL40330
initial start up. 5/8" diameter stainless steel sleeve inserts into pan or tank and secures with a welded on 1/2"NPT brass screw-in fitting. 120-volt operation. ALL76415 ..... 4-3/4" Long Heater Element w/3' Long Cord, 400 W ALL76416 ..... 7-1/2" Long Heater Element w/12" Long Cord, 250 W WARNING! Do not plug heater in without being installed in tank and submersed in liquid, element heats up quickly and damage will result.
Fuel pressure indicator gauge allows pre- adjustment of the high speed secondary and main valve opening pressures using a compressed air source. Gauge can be mounted directly to the wall or tool box. 4-1/2" diameter dial has a 0-160 PSI range.
Down Nozzle Filters Down nozzle filters optimize spray and eliminate dirt and debris.
ALL40325..... Down Nozzle Filters, 8-Pack ALL40326..... Down Nozzle Filter, Each
Down Nozzle Plugs ALL40327 Plug off ports in down nozzle filters. 1/2"-20 thread seals with included O-ring. Package of 8.
Tyler Courtney
Photo: JohnnyB Imagery
www.allstarperformance.com
164
Made with FlippingBook flipbook maker