Nose Wing Wall Mount Brackets ALL12214 Brackets attach to the side of trailer wall to hold a spare sprint car front nose wing safely in place. Powder
Sprint Wing Line Kit ALL48006 Kit includes light- weight, coated stain- less steel braided lines and aluminum fittings to help simplify
coated aluminum brackets feature slotted arms that are fully adjustable
plumbing of KSE Gen2 steering gear and wing cylinder. Kit includes (2) #4 slider lines (22" long and 36" long), (2) #4 pressure and return lines (18" long), (4) 45° 4AN to 1/8"NPT valve fittings, (2) 90° 4AN to 1/8"NPT cyl- inder fittings and (2) high-flow -3 ORB to -4AN fittings.
to accommodate a variety of nose wing shapes and sizes. Sold in pairs with retention straps to keep wing secure.
Top Wing Trees Wing trees have an “X” design for lateral and horizontal
ALL55130 ALL55132
Wing Caps
strength. Available in 16" and 18" tall versions, each tree
Prevent rock and debris from damaging the leading edge of many popular sprint car wings with a protective cap. ALL23220..... Top Wing Cap, 60" Long, High Impact Plastic ALL23222..... Front Wing Cap, 36" Long, High Impact Plastic
is adjustable and will extend up to 6" with adjustment holes located at 1" increments. 16" trees are ideal for X wedge cars to keep the back of the top wing lower while providing optimal top wing tilt at high speed tracks. 4130 chrome
ALL55131 ALL55133
ALL23221 ..... Top Wing, 60" Long, Carbon Fiber ALL23223..... Front Wing, 36" Long, Carbon Fiber Manual Wing Adjuster ALL48004
moly 3/4" x .060" tube construction. Wing trees are 26" wide at the top and have a min/max bottom width of 25-3/4" to 26-1/2". Adjuster pins not included. Part No. Height Finish ALL55130 16" (Extends To 22") Black ALL55131 16" (Extends To 22") Plated ALL55132 18" (Extends To 24") Black ALL55133 18" (Extends To 24") Plated Related Parts ALL17028...... Titanium Adjuster Pins, (1-Pair) ALL55134 ..... Top Wing Tree Slider, Black ALL55135 ..... Top Wing Tree Slider, Plated Titanium Top Wing Pin Kit ALL17028 Kit includes two pins with locking clips for adjusting wing tree height.
Manual wing adjuster is for sprint car top wings when rules do not permit the use of hydraulic cylinders. Aluminum slider includes 3/8"-24 steel rod ends and is adjustable from 20" to 32" center-to-center in 1" increments with included 1/4" locking pin. Weighs less than 1 lb.
Hydraulic Wing Cylinders
Strong hydraulic wing cylinders have an aluminum body which houses a steel piston and pushrod assembly. Available in 10" and 12" length. ALL48000 .... 10" ALL48002..... 12" Titanium Studs For Wing Cylinders Single stud used to mount the wing
Top Wing Titanium Posts ALL55128 Top posts are 12" long overall and have a 5/16" diameter T-bar to fit a wide range of wings. Position of T-bar is set at 75°, providing additional wing angle. Posts are built from strong 1" x .150" wall titanium tube, sold as a pair.
cylinder to the chassis or wing tree. Stud has 3/8"-24 threads for mounting most cylinders. Mounting nuts not included. Sold each. ALL17036 ..... 5/16"-24 x 3/8"-24 x 1.640" Stud ALL17038 ..... 3/8"-24 x 3/8"-24 x 1.600" Stud
7/8"
ALL17036
ALL17038
www.allstarperformance.com
167
Made with FlippingBook flipbook maker