Titanium Shock Stud Kit For Frame Boss And Spuds Shock stud kits include four studs and nylon locking half nuts to mount
Titanium Pinch Bolt Kit For Torsion Arms And Pitman Arms ALL17032 Kit includes five bolts to replace standard 3/8"-24 x 1-7/8" hardware found in most torsion and pitman arms. Bolt kit weighs less than 90 grams. Titanium Bolt Kit For Torsion Arm Stop Adjuster ALL17034 Kit includes four 7/16"-20 stop adjuster bolts
shock to chassis or front axle. ALL17022 studs have 1/2"-20 threads that thread directly into pre-threaded bungs. ALL17040 studs are used with ALL17042 14mm- 1.5 tap to create threads in 1/2" through-bungs that would originally have through-bolts. ALL17022....... Stud Kit For 1/2"-20 Threaded Bungs ALL17022-1 .... Stud w/Nut (Single) For 1/2"-20 Threaded Bung ALL17040 ...... Stud Kit For 14mm-1.5 Threaded Bungs ALL17040-1 ....Stud w/Nut (Single) For 14mm-1.5 Threaded Bung ALL17042....... Tap (14mm-1.5 To Thread 1/2" Non-Threaded Bungs) Titanium Shock Studs For Rear Torsion Arms ALL17024 Shock stud kits include two studs with large support cones and four nylon locking half nuts to mount shock to most rear torsion arms. Studs and nuts weigh less than 50 grams. Titanium Steering Stud Kit ALL17026 Kit includes four studs with nylon locking half nuts that thread into steering and pitman arms with 1/2"-20 threads for properly mounting steering links. Black Half Nuts ALL17048 Black plated steel 1/2"-20 nylon lock nuts are grade 8 and a lightweight option to keep fas- teners in place. Package of 10. Titanium Pin Kit For Top Wing ALL17028 Kit includes two pins with locking clips for adjusting wing tree height. Titanium Studs For Wing Cylinders Single stud used to mount the wing
with 9/16" heads to replace or upgrade standard hardware found in torsion arm stops. Kit weighs less than 80 grams.
See Page 114 For Additional Titanium Fasteners.
Quick Change Gear Totes
Durable plastic quick change gear tote organizes extra gear sets and keeps them clean. Lid snaps shut to hold gears in place. 8"L x 5"W x 2"H.
Description
Single
10-Pack
QC Gear Tote White QC Gear Tote Black
ALL14350 ALL14351
ALL14350-10 ALL14351-10
QC Gear Tote Yellow 6-Spline (Midget) Gear Set
ALL14352
ALL14352-10
Gear Tote Tray ALL12269
Neatly organize up to 10 quick change gear tote boxes vertically. Tray is 21" long x 5-1/2" deep with a 4" tall front edge, making them perfectly sized for Allstar gear tote boxes. Quick Change Gear Case ALL14355 Sturdy composite storage case pro- tects and holds up to 8 sets of quick change gears. Case has molded in carrying handles and metal hinges. 5" x 8" x 15-1/2" overall when closed.
cylinder to the chassis or wing tree. Stud has 3/8"-24 threads for mounting most cylinders. Mounting nuts not included. Sold each. ALL17036 ..... 5/16"-24 x 3/8"-24 x 1.640" Stud ALL17038 ..... 3/8"-24 x 3/8"-24 x 1.600" Stud
ALL17036
ALL17038
Titanium Stud Kit For Torque Tubes ALL17030 Kit includes six 3/8"-24 x 3/8"-16 studs with 12 point steel nuts to secure torque tube to rear end housing. Kit weighs about 100 grams.
www.allstarperformance.com
174
Made with FlippingBook flipbook maker