Sprint Power Steering Lines
Steering Wheel Disconnects Disconnects allow easy installa- tion and removal of three bolt style steering wheels, often used to ease the entering and exiting of vehicles. to a standard 3/4" steering shaft. ALL52302..... Hex Style (Pin Type) ALL52300..... Spline Style (360° Flange) ALL52304..... SFI Spline Style (360° Flange) Replacement Parts ALL52303..... Hex Coupler for ALL52302 ALL52301..... Spline Coupler for ALL52300 ALL52305..... Spline Coupler for ALL52304 (2" of Spline Area) Steering Wheel Extensions Quick release aluminum steering wheel hub mates to a steel coupler, which is welded
ALL48260
Assembled lines for power steering have -6AN ends and are compatible with high pressure pumps found in today’s sprint cars where standard hose and fittings cannot be used. Lines are lightweight yet strong, weighing less than a standard high pressure hose assembly. Plumbing is perfect for connec- tion of KSE steering gear to pump. 13-1/2" long. ALL48260..... Line With Steel Ends And Protective Wrap ALL48261 ..... Line With Aluminum Ends
ALL52300
ALL52302
ALL52304
ATTENTION: Do not mix components with other manufacturer’s disconnects!
Sprint Power Steering Supply Line ALL48262
Gen2 supply line has a 90° -10AN and a straight -10AN aluminum fitting for a precise fit to the KSE Gen2 steering
ALL52301
ALL52303 ALL52305
gear. New style hose is very flexible, and will not collapse under suction. Total overall length including fittings 9".
Aluminum steering wheel extensions fit between steering wheel and quick disconnect so the distance between driver and steering wheel can be adjusted. Includes fasteners. ALL52310 ..... 1/2" ALL52312 ..... 1" ALL52314 ..... 1-1/2" ALL52316 ..... 2" Angled Steering Wheel Adapter ALL52325 Change the angle of your steering wheel! Unique adapter NEW! ALL52312 the angle for driver comfort. Dual mounting holes allow for specific steering wheel spoke location. Adapter is 1" thick at the widest area and includes fasteners. • Designed for use in quick steering race cars (late models, modifieds, road race). Not recommended for use with stock ratio steering box, slow steering applications. • Clearance Double Check: After installation be sure you have sufficient driver and seat belt clearance, as the steering wheel will no longer spin in a single plane (it moves in and out, when spun completely around). Molded Steering Wheel Pad ALL52322 Molded pad fits flat or dished 3-spoke steering wheels. Velcro straps are permanently secured to pad for quick installation. mounts between your steering wheel and disconnect, allowing you to change
Power Steering Box Fittings Allstar fittings convert
ALL48210 ALL48211 ALL48212 ALL48214
most power steering boxes and racks to -6AN fitting. O-Ring Style Fittings ALL48210* ... -6AN Male To 16mm Fitting With O-Ring
ALL48215 ALL48217
ALL48211 ..... -6AN Male To 14mm Fitting With O-Ring ALL48212* ... -6AN Male To 18mm Fitting With O-Ring ALL48214 ..... -6AN Male To 9/16"-18 Fitting With O-Ring Non O-Ring Style Fittings ALL48215 ..... -6AN Male To 5/8"-18 Fitting ALL48217 ..... -6AN Male To 11/16"-18 Fitting *These are the two most common fittings when O-rings are needed. Loading Couplers Loading coupler is a combina- tion U-joint and a non-locking steering coupler that slips over the splined end of the steering shaft for easier loading and unloading of cars in enclosed trailers through the use of a remote steering shaft. Coupler has a built-in U-joint that accepts 3/4" tubing. ALL52306..... 19-Spline For Allstar/Sweet ALL52307..... 20-Spline For Woodward Related Parts ALL52305..... 19-Spline End For Allstar/Sweet Disconnect
ALL52306
www.allstarperformance.com Steering Wheel Pad ALL52320 Black vinyl covered pad fastens to most three spoke racing steering wheels with three hook/loop straps. 5-3/4" diameter foam pad is 2" thick.
ALL52305
179
Made with FlippingBook flipbook maker