Metric Spindles New replacement spindles for 1979-88 GM cars. Sold each.
Impala Spindles Direct replacement OE spindle for the 1977-96
NEW!
Impalas feature a 12° pin inclination, 2" per foot upper and lower ball joint tapers and accept the large GM
ALL56318 ..... LH ALL56319 ..... RH Brake Rotors 1979-81 Outer bearing race has a 1.97" O.D.
brake calipers. ALL55988..... LH ALL55989..... RH Related Components
ALL42085..... Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. ALL42086..... Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. Brake Rotors 1982-88 Outer bearing race has a 1.78" O.D. ALL42087..... Rotor With 12mm-1.50 Studs, 5 On 4-3/4" B.C. ALL42088..... Rotor With 5/8"-11 Wheel Studs, 5 On 5" B.C. Related Components
ALL42081..... Brake Caliper Big GM RH ALL42082..... Brake Caliper Big GM LH
Taper Reamers Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle. ALL11170 ...... Reamer, 7.15°, 1-1/2" Taper Per Ft. ALL11172 ...... Reamer, 9.56°, 2" Taper Per Ft.
ALL42084..... LH GM Metric Caliper ALL42083..... RH GM Metric Caliper
ALL72305 † .... GM Intermediate Metric, 1979-81 ALL72306 ‡ .... GM Intermediate Metric, 1982-88
†Bearing For Race Or Cup With A 1.97" O.D. ‡ Bearing For Race Or Cup With A 1.78" O.D.
Taper Reamer Specifications For Ball Joints Part No. Taper Specs Part No.
Metric Spindle Savers ALL42130 Stamped steel spindle savers strengthen GM Metric spindles, rein-
Taper Specs
Ball Joint
Ball Joint ALL56217 ALL56218 ALL56220 ALL56280 ALL56284 ALL56286
ALL56204 1-1/2" Per Ft.
1-1/2" Per Ft.
ALL56206 ALL56208
2" Per Ft. 2" Per Ft.
2" Per Ft. 2" Per Ft.
forcing the steering arm portion of the spindle and making them suitable for wheel-to-wheel racing. IMCA legal and easily installed, spindle savers are retained by the lower ball joint and tie rod end retaining nuts. Sold in pairs.
ALL56210 1-1/2" Per Ft.
1-1/2" Per Ft. 1-1/2" Per Ft. 1-1/2" Per Ft.
ALL56212
2" Per Ft.
ALL56214 1-1/2" Per Ft. ALL56216 1-1/2" Per Ft.
–
–
Replacement Parts ALL42135 ..... Left Only ALL42136 ..... Right Only GM Metric 3-Piece Spindles Three-piece GM metric G-Body spindle is a forged and heat treated direct replacement for a fac- tory spindle with the added benefit of a stronger, replace- able steering arm and brake caliper bracket. Complete spindle includes a spindle body, bolt-on
Spindle Checker Tools Assure correct alignment of the
upper and lower ball joint when checking for bent spindles. Insert slugs
into spindle and guide rod will fit
through slugs if spindle isn’t bent. Kits fit most aftermarket race and GM stock Metric spindles. ALL11176 ...... Kit With GM Lower, 2" Taper ALL11177 ...... Kit With Chrysler Lower, 1-1/2" Taper ALL11184...... Kit For GM Metric, 2" Taper Related Parts ALL99140..... GM Lower Slug With Nut (2" Per Ft.) ALL99141 ..... Chrysler Lower Slug With Nut (1-1/2" Per Ft.) ALL99158 ..... GM Metric Lower Slug With Nut (2" Per Ft.) ALL99142 ..... Upper Slug With Nut (1-1/2" Per Ft.) ALL99159 ..... GM Metric Upper Slug With Nut (2" Per Ft.) ALL99143 ..... Replacement Guide Rod
ALL55976
steering arm, bolt-on brake bracket and a hardware kit. Spindle accepts stock 1979-88 G-body upper and lower ball joints, tie rod end, rotor, caliper and bearing kit. IMCA approved. Replacement components are also available for
quick, easy and affordable repairs. ALL55976 ..... LH, 3-Piece Spindle Kit ALL55977 ..... RH, 3-Piece Spindle Kit. Individual Parts ALL55980..... Spindle Body
ALL55978
ALL55978 ..... LH Steering Arm ALL55979 ..... RH Steering Arm ALL55981 ..... LH Brake Bracket ALL55982..... RH Brake Bracket ALL55983..... Hardware Kit
ALL55983
ALL55980
ALL55981
www.allstarperformance.com
185
Made with FlippingBook flipbook maker