Screw-In Upper Ball Joint ALL56214 (K772)
Low Friction Upper Ball Joints
Most popular upper joint used. Originally used in Dodge, Chrysler and Plymouth cars. Fits Allstar ball joint holders and Lefthander chassis style upper control arm or where a screw-in type ball joint is required. Replaces AFCO 20034. 1-1/2" taper per foot.
Low friction, economical OEM ball joints are high performance units designed for smooth suspension travel. Some ball joints are available with longer than stock pin length for correcting roll centers. Ball joints have hardened pins with stock type housings and are not rebuildable. Legal for classes that require non-take apart ball joints. For off-road use only. Part No. Type
Bolt-In Upper Ball Joints ALL56204 (K6024)
Length Taper Per Ft.
Replaces ALL56214 (K772) ALL56010 Screw-In
Standard
1-1/2" 1-1/2" 1-1/2"
Fits UB Machine style upper control arm where a bolt-in style ball joint is required. Replaces AFCO 20031. Outer mounting bolt holes are 2.82" CTC. 1-1/2" taper per foot. ALL56208 (K6136) Bolt-in type joint fits Impala spindle. Can be used to raise roll center on Street Stock and modified cars. Fits Impala, Camaro and Chevelle spindles. Replaces AFCO 20032-1. Outer mounting bolt holes are 2.82" CTC. 2" taper per foot. ALL56220 (K5208) Fits full-size 1971-94 Impala spindles. Also fits 1971-81 Camaro and 1973-88 Chevelle/ Monte Carlo. Replaces AFCO 20032. Outer mounting bolt holes are 2-1/2" CTC. 2" taper per foot. Steel Upper Ball Joint Wrench ALL11190 Easily remove and install small body (ALL56214) Chrysler ball joints. Ball Joint Spreader Tool ALL11174 Tool separates ball joint from the spindle. Inside of cylinder is shaped to fit over tapered stud of most ball joints and presses against stud of other ball joint. Not for use on FWD or 4WD applications. Tool is 4" tall fully collapsed and 6" tall fully extended. Related Parts ALL11175 ...... 1" Extensions (Set of two) ALL11175
ALL56011 ALL56012
Screw-In Screw-In
1/2" Longer 1" Longer
Replaces ALL56204 (K6024) ALL56014 Bolt-In Replaces ALL56208 (K6136) ALL56015 Bolt-In Replaces ALL56220 (K5208) ALL56018 Bolt-In
Standard
1-1/2"
3/8" Longer
1-1/2"
Standard
2" 2" 2"
ALL56019 ALL56020*
Bolt-In Bolt-In
1/2" Longer 1" Longer
* NEW!
Adjustable Upper Ball Joints With mono-ball joints, upper control arm angles can be adjusted. Joints include plate, ball, tapered shaft, adjuster bushings and nut. ALL56260..... LH Large GM Joint (ALL56204 Style)
ALL56267
ALL56260
ALL56261 ..... RH Large GM Joint (ALL56204 Style) ALL56264..... LH Mid-Size GM Joint (ALL56220 Style) ALL56265..... RH Mid-Size GM Joint (ALL56220 Style) ALL56267..... Adjustable Screw-In Upper Ball Joint (ALL56214 Style) Replacement Parts ALL56262..... Stud For ALL56260, ALL56261 And ALL56267 ALL56266..... Stud For ALL56264 And ALL56265 ALL99098 .... Replacement Mono Ball Bearing 5/8" Ball Joint Sleeves Steel sleeves allow custom fabrication of control arms. ALL56250..... Small Screw-In ALL56214/ALL56217 (K772/K719)
ALL56250
ALL56251 ..... Large Screw-In ALL56216 (K727) ALL56252..... Large Press-In ALL56206 (K6141) ALL56253..... Med. Press-In ALL56212 (K6117)
Jason Hughes
Photo: Tyler Rinken Frank Heckenast, Jr.
Photo: Marcus Berglund
www.allstarperformance.com
186
Made with FlippingBook flipbook maker