Screw-In Lower Ball Joints ALL56216 (K727)
Low Friction Lower Ball Joints Low friction economical OEM ball joints are high performance units designed for smooth suspension travel. Some ball joints are
Fits Lefthander chassis style lower control arm or where a large screw-in type ball joint is required. Replaces AFCO 20036). 1-1/2" taper per foot.
available with longer than stock pin length for correcting roll centers. Ball joints have hardened pins with stock type housings and are not rebuildable. Legal for classes that require non-take apart ball joints. For off-road use only. Part No. Type Length Taper Per Ft. Replaces ALL56216 (K727) ALL56030 Screw-In Standard 1-1/2" ALL56031 Screw-In 1/2" Longer 1-1/2" ALL56216 Housing With ALL56206 Pin ALL56034 Screw-In Standard 2" ALL56035 Screw-In 1/2" Longer 2" ALL56214 Housing With ALL56206 Pin ALL56049 † Screw-In Standard 2" ALL56050 † Screw-In 1/2" Longer 2" ALL56051 † Screw-In 1" Longer 2" Replaces ALL56210 (K5103) ALL56042 Press-In Standard 1-1/2" ALL56210 Housing With ALL56206 Pin ALL56027 Press-In Standard 2" ALL56028 Press-In 1/2" Longer 2" ALL56029 Press-In 1" Longer 2" Replaces ALL56212 (K6117) ALL56044 Press-In Standard 2" Replaces ALL56218 (K6145) ALL56046 Press-In Standard 2" ALL56047 Press-In 1/2" Longer 2" ALL56048 Press-In 1" Longer 2" †Commonly used with ALL56256 ball joint adapter sleeve. Adjustable Lower Ball Joints Replace standard ball joint with an adjust- able mono-ball style lower ball joint. Includes adapter sleeve, ball, adjuster bushings, stud and nut. ALL56270 ..... Screw-In Chrysler Stud (Common Dirt, ALL56216 Style) ALL56276......Screw-In GM Impala Stud (Common Asphalt) ALL56216 Style With ALL56206 Pin ALL56272..... Press-In Large GM Impala Stud (Common Asphalt, ALL56206 Style) ALL56274......Press-In Mid-Size GM Stud (ALL56218 Style) Replacement Parts ALL56271 ..... Stud For ALL56270 ALL56273..... Stud For ALL56272 And ALL56276 ALL56275..... Stud For ALL56274 ALL99092..... Housing For ALL56270 And ALL56276
ALL56217 (K719) Compatible with stock lower control arms modified with ALL56250 weld-in threaded sleeve. 1-1/2" taper per foot.
Press-In Lower Ball Joints ALL56206 (K6141)
Ball joint fits most tubular lower CT control arms and 1971-76 Impala. Taper fits most fabricated and Impala spindles. Base O.D. is 2.190". Replaces AFCO 20038. 2" taper per foot. ALL56210 (K5103) Popular ball joint fits 1964-72 Chevelle and 1967-69 Camaro. Base O.D. is 2.015". Replaces AFCO 20033. 1-1/2" taper per foot.
ALL56212 (K6117) Ball joint fits Impala spindle. Can be used to raise the roll center on Street Stock or Modified cars. Base O.D. is 1.975". Replaces AFCO 20038-1. 2" taper per foot.
ALL56218 (K6145) Ball joint fits popular full-size 1977-89 Impala spindles. Also fits 1971-81 Camaro and 1973-88 Chevelle/Malibu. Base O.D. is 2.090". Replaces AFCO 20039. 2" taper per foot.
Ball Joint Adapter Sleeve ALL56256
Adapter sleeve is ideal for modifying stock style Chevelle lower control arms to accept a screw- in style ball joint. Adapter sleeve has an O.D. of 2.010" to take the place of a press-in style ball joint (ALL56210/ K5103), allowing for installation of a screw in style ALL56214 with a 1.5" taper/ft. pin or ALL56049 with a 2" taper/ft. pin ball joint. Note: Modifications to control arms may be necessary for proper fit of sleeve. Sleeve must be welded to the control arm after installation.
ALL99093..... Housing For ALL56272 ALL99094 .... Housing For ALL56274 ALL58002..... Replacement Mono-Ball ALL99096 .... Replacement Snap Ring ALL99097..... Replacement Spacer Kit Adapter Bushing ALL56225 Convert a 2" taper per foot hole to accept a ball joint with a 1-1/2" taper per foot. For lower ball joints only.
www.allstarperformance.com
187
Made with FlippingBook flipbook maker