Upper Control Arms Powder coated, bushing style A-arms are available with steel or aluminum cross
Upper Control Arm Mounting Bracket ALL60190
Bracket is flame cut from 1/2" thick steel, with 6" bolt spacing. Welds to frame and accepts upper A-arm. Upper Control Arm Shims
shaft and a straight or 10° ball joint position. Shaft bolt holes are 1/2" diameter, spaced 6" on center. Tig welded .095" D.O.M. tube construc- tion. Bolt-in style arms accept ALL56204 or Moog K6024 ball joints. Screw-in style arms accept ALL56214 or Moog K772 ball joints. ALL57906
Individual steel shims fit between the upper control arm and chassis mount to adjust caster and camber. Shims have 9/16" wide slots and easy-to-grasp tabs for installation and removal. Package of 10. ALL60200..... 1/16" (0.062") ALL60201 ..... 1/8" (0.125") 1-Piece Upper Control Arm Shims Dual mount shims fit between the upper control arm and chassis mount to adjust camber. One-piece design works with most mounts/control arms with 6" bolt spacing using 1/2" mounting hardware. Sold each. ALL60203..... 1/8" (0.125") ALL60204..... 3/16" (0.185") ALL60205..... 1/4" (0.250") ALL60206..... 3/8" (0.375") ALL60207..... 1/2" (0.500") ALL60208..... 3/4" (0.750") ALL60209..... 1" (1.00") ALL60210 ..... 7-Piece Kit, Includes ALL60203-60209 (1 of each) Caster Kit adapter and level holder to your upper ball joint threads. Additional adapters may be purchased separately for other use. Digital Level sold separately. ALL11162 ...... Kit With Holder, BJ Adapters And Carry Case (No Digital Level) ALL11164...... Holder Only For Digital Level ALL11165 ...... Quickchange Pinion Angle Adapters (2) ALL11166...... Late Model Spindle Adapter ALL10742...... 2x2 Digital Level Caster Plate ALL10752 expensive turn plates, you’re never certain, until now. This quick reference gauge positions under the upper ball joint nut, with markings facing up, for easy viewing. Place a mark on the shock body or fabricate an indicator to use as a reference point. Mono Ball Bearings ALL60205 ALL60201 NEW! Measure your front end caster by attaching an Not sure if you turned your wheels the same amount each time when adjusting caster settings on your race car? Unless you have
Bolt-In Alum. Shaft
Bolt-In Steel Shaft
Screw-In 10° Alum. Shaft
Screw-In 10° Steel Shaft
Size
7"
– –
– –
ALL57940 ALL57941 ALL57942 ALL57943 ALL57944 ALL57945 ALL57946 ALL57947 ALL57948 ALL57949 ALL57950 ALL57951 ALL57952 ALL57953 ALL57954 ALL57956
– –
7-1/4"
7-1/2" ALL57902 7-3/4" ALL57903 8" ALL57904 8-1/4" ALL57905 8-1/2" ALL57906 8-3/4" ALL57907 9" ALL57908 9-1/4" ALL57909 9-1/2" ALL57910 9-3/4" ALL57911 10" ALL57912 10-1/4" ALL57913 10-1/2" ALL57914 11" ALL57916
ALL57922
ALL57962
–
–
ALL57924
ALL57964
–
–
ALL57926
ALL57966
–
–
ALL57928
ALL57968
–
–
ALL57930
ALL57970
–
–
ALL57932
ALL57972
–
–
ALL57934 ALL57936
ALL57974 ALL57976
Metric Upper Control Arms Upper control arms fit stock, 6-7/8" mounts, found on Mid-size GM metric frames. Use with bolt-in style
ball joint, Allstar 56220 or Moog K5208. Steel control arms have a steel cross shaft with holes spaced 6-7/8" on center. ALL57990..... RH, 8" ALL57992..... LH, 8-1/2" ALL57994..... LH, 9" ALL57995..... LH, 9-1/2" ALL57996..... LH, 10"
ALL57990
IMCA Legal Upper Control Arms IMCA legal upper control arms fit stock 6-7/8" mounts, found on
mid-size GM Metric frames. Use with bolt-in style ball joint, Allstar 56220 or Moog K5208. Steel control arms are available with steel or aluminum cross shaft and come complete with “IMCA certified” sticker. ALL57830..... RH, 8" With Steel Cross Shaft ALL57831 ..... LH, 8-1/2" With Steel Cross Shaft ALL57832..... RH, 8" With Aluminum Cross Shaft ALL57833..... LH, 8-1/2" With Aluminum Cross Shaft ALL57831
Mono balls are commonly used in fabrication of products including J-bars, control arms and trailing arms. Bearings have an external grease
ring and orifice which allows the bearing to be installed in custom applications that can be externally lubricated.
ALL58001..... 5/8" ALL58002..... 3/4"
www.allstarperformance.com
188
Made with FlippingBook flipbook maker