Ball Joint Holders
Slotted Upper Control Arm Bracket Kit ALL60077 Kits contain (2) slotted brackets, (2) centered bushings, (2) reducer spacers for 5/8" rod end and a 1/2" bolt and nyloc nut. Offset alu- minum bushings (sold separately) allow for plenty of adjustment options. Insert Bushings ALL60080 ........... Centered Bushings (Pair) ALL60081............ 1/8" Offset Bushings (Pair) ALL60082............ 1/4" Offset Bushings (Pair) ALL60083............ 3/8" Offset Bushings (Pair) ALL60084 ........... 1/2" Offset Bushings (Pair) Upper Control Arm Brackets ALL60025 Stamped 3/16" mild steel brackets weld to chassis as a mounting point for upper control arm. Brackets have two 5/8" holes, spaced 7/8" apart for adjustment. May be trimmed to desired height. Package of 2.
ALL56296 ALL56297
ALL56294
ALL56295
ALL56290
ALL56292
Holders are ideal for those who fabricate their own control arms. The holders have a 5/8" male RH thread and a 3/8" hole, commonly used with a clevis. Holders accept ALL56214 or Moog K772 style screw-in ball joints, sold separately. ALL56290..... LH Angled Stud, Angled Tab, Standard Spread ALL56292..... RH Angled Stud, Straight Tab, Standard Spread ALL56294..... LH Angled Stud, Angled Tab, Wide Spread ALL56295..... RH Angled Stud, Straight Tab, Wide Spread ALL56296..... Universal Straight Stud, Straight Tab, Wide Spread ALL56297..... Universal Design (ALL56296) Angled At 15° ALL56194 ..... 5/8" RH Steel Clevis (Commonly Needed) ALL56214 ..... Screw-In Ball Joint (Most Common) Unwelded Ball Joint Holder Kit ALL56298
Kit allows components to be welded at any angle. Stud is 5/8"-18RH thread, bracket has a 3/8" hole. Holder accepts ALL56214 or Moog K772 style screw-in upper ball joint. Female Double Adjusters Steel double adjusters increase adjustment capability of control arms, trailing arms, Panhard bars, tie rod ends and other items using threaded tube. Adjuster includes two jam nuts. ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long Steel and Aluminum Clevises
Set-Up Plates Set-up plates are used for squaring and stringing chassis to ensure accurate chassis set-up by eliminating wheel and tire differences. Plates are 1/2" thick and can also be used when setting bump steer or checking axle tubes for straightness. Sold each. ALL10660 ..... 5x5, 7" x 28" ALL10662 ..... Wide 5, 12" x 28"
ALL10660
ALL10662
Storage Tote ALL059 Durable storage tote has many uses around the
.230 "
.230 "
1.000"
shop or in the trailer. Store extra parts or keep parts from being damaged during storage. Great for organizing ratcheting tie downs, specialty tools, such as tire groover, siper and
4.000"
3.460"
2.000"
related tools. Totes also work well for storing chemicals and fluids to prevent spilling in cabinets. Interlocking lid design allows multiple totes to be securely stacked together. Inside dimensions are 20" L x 14" W x 12" H.
ALL56192, ALL56193
ALL56194
3/4" clevises attach strut rod to A-frame (3/4"-16 thread with a 1/2" hole). 5/8" clevises, commonly used with Lefthander style upper A-arms, connect to ball joint holder (5/8"-18 thread with a 3/8" hole). ALL56192 ..... 3/4" RH Steel ALL56193 ..... 3/4" RH Aluminum ALL56194 ..... 5/8" RH Steel
www.allstarperformance.com
189
Made with FlippingBook flipbook maker