Steel Control Arm Bushings Allstar Steel Control Arm Bushings replace stock rubber bushings and eliminate deflection, a common problem with original equipment bushings. Lower Control Arm Bushing Applications Part No. Application Bushing Position O.D.
Roller Bearing Lower Control Arm Bushings Free up stock front suspensions and help prevent binding commonly found with stock rubber and steel insert bushings. Steel bodied bushings are complete with needle roller bearings and hardened inserts that are ready to install and do not require special mounting hardware. All bushings have 1/2" I.D. mounting holes. Part No. Application Bushing Position O.D. Chevelle, Monte Carlo, GM Intermediates ALL56221
ALL56230
ALL56223
UHL Hole Size
Chevelle, Monte Carlo, GM Intermediates ALL56230 1964-66 Front (2nd Design) 1.345" 2.100" .500" 1967-74 Front 1.345" 2.100" .500"
1964-66 Front (1st Design) 1.645" 2.100" .500" 1975-77 Front 1.645" 2.100" .500" 1964-72 Rear 1.645" 2.100" .500" 1978-88 Rear 1.645" 2.100" .500"
ALL56232
UHL Hole Size
1964-66 Front (2nd Design) 1.345" 2.100" .500" 1967-74 Front 1.345" 2.100" .500" 1964-66 Front (1st Design) 1.645" 2.100" .500" 1975-77 Front 1.645" 2.100" .500" 1964-72 Rear 1.645" 2.100" .500" 1978-88 Rear 1.645" 2.100" .500"
ALL56233
–
–
1.645" 2.100" .562" 1.900" 2.100" .500" 1.900" 2.100" .562" 1.440" 2.750" .500" 1.345" 2.100" .500" 1.645" 2.100" .500" 1.645" 2.100" .500" 1.900" 2.100" .500" 1.440" 2.750" .500"
ALL56234 1973-77
Rear
ALL56235
–
–
ALL56236 1978-88 Camaro, Firebird ALL56230 1967-74 ALL56232 1975-81 ALL56234 1973-88 ALL56236 1982-92 1967-72
Front
ALL56222
Front Front Rear Rear Front
ALL56223 1973-77 ALL56224 1978-88 Camaro, Firebird ALL56221 1967-74
Rear Front
1.900" 2.100" .500" 1.440" 2.750" .500"
Front Front Rear Rear Front
1.345" 2.100" .500" 1.645" 2.100" .500" 1.645" 2.100" .500" 1.900" 2.100" .500" 1.440" 2.750" .500"
1975-81 1967-72
Upper Control Arm Bushing Applications Part No. Application Bushing Position O.D. Chevelle, Monte Carlo, GM Intermediates ALL56238 1967-72 All
ALL56222
UHL Hole Size
ALL56223 1973-88 ALL56224 1982-92
1.275" 1.250" .675" 1.530" 1.500" .695" 1.394" 1.500" .690" 1.311" 1.425" .690" 1.275" 1.250" .675" 1.394" 1.500" .690" 1.311" 1.425" .690"
Replacement Parts ALL99250..... Thrust Bearing Set Related Parts ALL56226..... Nylon Bushing Kit (Optional bushings to replace roller bearings when conforming to some sanctioning body rules.)
ALL56240 1978-88 ALL56242 1973-77 ALL56244 1973-77 Camaro, Firebird ALL56238 1967-69 ALL56242 1974-79 ALL56244 1974-79
All
Front Rear
All
Front Rear
Lightweight, Low Friction Lower Control Arm Bushings Designed specifically for racing these bushings feature a lightweight housing
ALL56228
with 2 steel inner bushings, machined so they can be tightened without binding. O-rings on each side help keep the bushings in place while installing and also help keep dirt out. Bushings should be disassembled and reas- sembled with a good quality wheel bearing grease prior to installation. Chevelle 1964 - 1974
ALL56227..... Front ALL56229..... Rear Metric 1978 - 1988 ALL56228..... Front ALL56229..... Rear
Greg Brown
Photo: RW Motorsports
ALL56229
www.allstarperformance.com
190
Made with FlippingBook flipbook maker