1978-88 Metric Front Lower Control Arms
Chevelle Tubular Lower Control Arms – Helix Bottom
NEW 1" Longer!
ALL57810 ALL57812
ALL57811 ALL57813
ALL57804
ALL57805
Reproduction of the originals, these new arms are a direct replacement for 1978-88 metric chassis and accept stock ball joints.
Heavy duty control arms are made with 1-1/4" D.O.M. tubing with 1" D.O.M. cross bracing. Helix bottom cor- rectly positions 5" or 5-1/2" conventional spring for proper performance. Black powder coated with high quality rod ends and separate shock bracket which will require welding or bolting onto the arm. Rod end spacer kit is required to adapt rod end to fit in the stock frame mount (sold separately). These lower control arms are intended for racing and will not accept stock style lower ball joints. Press-In Ball Joint Control Arms (Use ALL56212/K6117) ALL57810 ..... RH ALL57811 ..... LH Screw-In Ball Joint Control Arms (Use ALL56216/K727) ALL57812 ..... RH ALL57814 ..... RH 1" Longer NEW! ALL57813 ..... LH Related Part ALL56322..... ’68-72 Chevelle A-arm Spacer Kit, 4-Pieces Tubular Lower Control Arms – Flat Bottom Heavy duty control arms are made with 1-1/4" NEW 1" Longer! works with 5" or 5-1/2" conventional springs which must be mounted with the closed end seated in the control arm and the open end in the upper spring cup or a spring ramp (sold separately) may be welded onto the lower plate to place the open end down. Black powder coated arms feature high quality rod ends and separate shock bracket which will require welding or bolting onto arm. Rod end spacer kit is required to adapt rod end to fit in the stock frame mount (sold separately). These lower control arms are intended for racing and will not accept stock style lower ball joints. Press-In Ball Joint Control Arms (Use ALL56212/K6117) ALL56320..... RH, ’64-72 Chevelle ALL56328..... RH, ’64-72 Chevelle 1" Longer NEW! ALL56321 ..... LH, ’64-72 Chevelle ALL56321 ALL56320 D.O.M. tubing and 1" D.O.M. cross bracing. Flat bottom design
ALL57804..... RH ALL57805..... LH
1964-72 Chevelle Lower Control Arms
ALL57800 ALL57802
ALL57801 ALL57803
Reproduction 1964-72 A-body lower control arms are coated and have the same fit and appearance as the fac- tory arms. Both versions are made to meet the same toler- ance as the original. The deluxe arms have a more precise spring pocket for more consistent suspension geometry. They also accept the larger wire diameter of heavier rated
racing springs. ALL57800..... RH ALL57801..... LH
ALL57802..... RH Deluxe ALL57803..... LH Deluxe
Ball Joint Adapter Sleeve ALL56256 Adapter sleeve is ideal for modifying stock style Chevelle lower control arms to accept a screw-in style ball joint. Adapter sleeve
has an O.D. of 2.010" to take the place of a press-in style ball joint (ALL56210/K5103) allowing for installa- tion of a screw in style ALL56214 with a 1-1/2" taper/ ft. pin or ALL56049 with a 2" taper/ft. pin ball joint. Note: Modifications to control arms may be necessary for proper fit of sleeve. Sleeve must be welded to the control arm after installation. TECH TIP To minimize distortion of sleeve during press-in, it is recommended that the ball joint be threaded into sleeve during press-in procedure. Spring Ramp ALL56326 Ramp welds to the flat spring pocket area of aftermarket control arms to support the open end of conventional 5" or 5-1/2" springs, allowing springs to be used in the traditional position.
ALL56323..... RH, ’68-74 Nova ALL56324..... LH, ’68-74 Nova Related Parts
ALL56322
ALL56322..... ’68-72 Chevelle A-arm Spacer Kit, 4-Pieces ALL56325..... ’68-74 Nova A-arm Spacer Kit, 5-Pieces ALL56326..... Spring Ramp (Helix) Note: Ball joints should be tack welded into lower control arm after assembly.
www.allstarperformance.com
191
Made with FlippingBook flipbook maker