Lower Control Arm Limit Clamps Clamps fasten around tubular lower control arms providing a lower mounting point for a suspension limit chain. Clamps are double shear style and accept 5/16" hardware. ALL68340..... 1" ALL68341..... 1-1/8" ALL68342..... 1-1/4" Lower Control Arm Kits Universal kits are 2" longer than standard arms
Coarse Thread Weight Jack Bolts Weight jack bolts have 1"-8 threads for quick adjustment. Use
ALL56106
with ALL56113, ALL56114 and ALL56115 style spring plates. ALL56106 ..... 8" Steel ALL56107 ..... 11" Steel Weight Jack Bolts
With Internal Thread Bolts have a 7/16"-20 internal thread on one end for use with bolt-on and swiveler spring cups. Coarse thread bolts have 1"-8 outer threads while fine thread bolts are 1-1/8"-12. Coarse Thread 1"-8 With 3/4" Hex ALL56094..... 4" Steel ALL56095..... 6" Steel ALL56066..... 8" Steel ALL56067..... 11" Steel Fine Thread 1-1/8"-12 With 1/2" Square Drive
ALL56095
and must be cut to length before welding slug into place. Ball joint sold separately.
ALL56186
ALL56186 ..... LH Kit, Use With Screw-In Ball Joint (ALL56216) ALL56187 ..... RH Kit, Use With Screw-In Ball Joint (ALL56216) Cross Member Bushings ALL56188 Bushings mount on the inside end of a strut-style lower control arm to act as a spacer
ALL56090..... 6" Aluminum ALL56091..... 8" Aluminum ALL56092..... 6" Steel ALL56093..... 8" Steel Jam Nuts For Jack Bolts Steel jam nuts for jack bolts
between each side of the 3/4" inner rod end and the crossmember. Package of 2.
ALL56068
ALL56110
ALL99052
ALL56068..... 1"-8 (Coarse) 1-1/8" Wrench ALL56110 ..... 1"-8 (Coarse) 1-1/2" Wrench ALL99052..... 1-1/8"-12 (Fine) 1-3/8" Wrench Weight Jack Bolt Collars Steel collar typically welds onto frame or chassis for installation of a threaded jack bolt. Collar includes grease fitting. ALL56099..... 1"-8 ALL56098..... 1-1/8"-12 Weight Jack Bolt Sleeves Weld-in mild steel sleeve provides a mounting point for jack bolts or adjustable shock mounts. Sleeves are 2" long and have a 1-3/8" O.D. for welding onto chassis tubing. Weight Jack Plate ALL56112 Heavy-duty steel plate has a threaded boss welded to the center to accept jack bolts with 1"-8 coarse threads. O.D. is 5". Coarse Thread Nut With Sleeve ALL56111 Steel coarse thread nut with sleeve has 1"-8 coarse threads. ALL56109 ..... 1"-8, Coarse Thread ALL56073..... 1-1/8"-12, Fine Thread
Double Adjusters Steel double adjusters increase adjustment capability of control arms, trailing arms, Panhard bars, tie rod ends and other items using threaded tube. Adjuster includes one LH and one RH jam nut.
ALL56196 ..... 5/8"-18 RH Male/LH Male, 4-1/4" Long ALL56197 ..... 3/4"-16 RH Male/LH Male, 5" Long ALL56198 ..... 5/8"-18 RH Male/LH Female, 4" Long ALL56199 ..... 5/8"-18 LH Male/RH Female, 4" Long Short GN Strut Bar ALL56190 Fits lower strut arm on strut bar chassis. Bar has 3/4"-16 LH threads (3" long). Hole spacing is 2-1/2".
ALL56073
Brian Campbell
Photo: RW Motorsports
www.allstarperformance.com
192
Made with FlippingBook flipbook maker