Quick Adjust External Bump Stop Kit ALL56361 External bump stop kit allows adjustment of sus- pension travel separate from the coil-over unit. The detented adjuster nut can be turned on the rod end for quick adjustment. Each half turn equals 1/16" eliminating the need for packer shims. Kit bolts to the outside of lower control arm and to an upper chassis location (may need to drill a hole or use a clamp on bracket). Fine tune vehicle set-up by adjusting the upper bushing plate. Includes built-in travel indicator and two yellow 75 durometer bushings. Will also accept bump springs with 5/8" I.D. retainers (not included).
Shock Eye Socket ALL64255 The ideal tool for shock rebuilders or anyone that disassembles shocks on a regular basis! Unique socket safely
removes and installs the shock rod end without risk of damage to the spherical ball. Steel socket contacts the outer housing of 1/2" rod ends up to .640" wide and has a 1/2" drive for ratchet or impact use.
Shock Inflation Tool ALL64260 Shock inflation tool threads onto shock Schrader valves. Fill valve and 0-300 PSI gauge head independently rotate a full 360°, for easy filling and reading. Complete with built-in bleeder and includes a protective storage case.
Ride Height Set-Up Stick ALL10658 Stick replaces the coil over shock and spring assembly during maintenance. Stick has many uses and may be adjusted to check settings at normal ride height, in race
Shock Workstations The all-in-one shock workstations hold
attitude or on the bump stops to evaluate suspension travel. Adjusts from 15" to 24", measured at the center of rod ends.
shock bodies in the upright position for ease of shaft
ALL64263
removal or assembly and hold shock shafts vertical or horizontal for easier repairs or revalving. Workstations are constructed of aluminum, can be placed in a vise, and have 1/4" threaded holes for custom mounting.
Shock Racks Shock rack holds four
ALL64264
shocks with 2-1/2" springs and easily mounts to trailer, shop wall
ALL64263..... Single Shock Workstation ALL64264..... Double Shock Workstation
or pit cart. Rack is designed to hold shocks in place by pushing shock rod
Shock Workstation Base ALL64267 Steel base is helpful when mounting Allstar shock work- station (ALL64264) in a trailer or to a shop workbench. Mounting hardware included.
end or eye over the outer O-ring or alternatively, the outer O-ring may be removed to expose a predrilled hole for a hairpin clip such as ALL18442, sold separately. ALL12212...... Standard Rack ALL12211...... Adjustable Base Rack
ALL12211
Shock Drip Cup ALL64265 No more messy oil soaked rags or shock oil dripping onto the workbench. Shock drip cup has a specially designed rubber seal that conforms to a broad range of shocks and holds cup in place. Fits 1-1/2" to 2-1/8" O.D. shock bodies. ALL99290..... Replacement Drip Cup Seal
Zack VanderBeek
Photo: Tyler Rinken
www.allstarperformance.com
195
Made with FlippingBook flipbook maker