Weld-On Shock Brackets Weld-on shock brackets mount standard and coil-over shocks with 1/2" I.D. inner bushing or 1/2" rod end to chassis as well as many other uses. 1/8" thick mild steel brackets include 1/2" bolt, spacer and locknut. Notched Tube Mount Bracket is notched for 1-1/2" – 1-3/4" round tubing to create a gusset style mount that welds on three sides. Notched design positions the bracket perpendicular to the tubing at a 90° angle for straight mount and approximately a 75° angle for angled mounts.
Straight Mount
ALL60103
ALL60104
ALL60112
ALL60113
ALL60103 ..... Short ALL60104..... Long ALL60112 ..... Long Two Position ALL60113 ..... Extra Long Three Position
Angle Mount
ALL60100
Bottom View
ALL60101
Bottom View
ALL60100..... Left Hand ALL60101 ..... Right Hand
Round Tube Mount Bracket welds parallel onto tubing. Typically mounted above or below tubing and includes 1/2" shock mounting hardware. Mounting posi-
tions are on 1" centers. ALL60107 ..... One Position ALL60114 ..... Two Position ALL60115 ..... Three Position Flat Mount ALL60106 Bracket mounts to a flat surface or square tubing.
ALL60107
ALL60114
ALL60115
Shock Spacers Steel spacers have a 1/2" I.D. and 3/4" O.D. and can be used in a variety of other locations. Length 2-Pack 10-Pack
25-Pack
1/4" 1/2" 5/8" 3/4"
ALL64280 ALL64282 ALL64283 ALL64284
ALL64280-10 ALL64280-25 ALL64282-10 ALL64282-25 ALL64283-10 ALL64283-25 ALL64284-10 ALL64284-25
Shock Bracket Replacement Parts ALL99100..... Bolt, locknut, and bushing ALL99101 ..... Bushing only
www.allstarperformance.com
200
Made with FlippingBook flipbook maker