Panhard Bar Spacers Spaces Panhard bar away from rear mounted power steering, brackets, etc. Aluminum or steel. 3/4" I.D. ALL56144 .....Aluminum ALL56145 ..... Steel
Panhard Bars Panhard bars are formed
from 1.250" tubing with 3/4"-16 threads in each end. For use with 3/4" RH rod ends and
ALL56144
ALL56145
clamp-on brackets (ALL60180 or ALL60181). Center- to-center length reference is figured including rod ends. Rod ends sold separately. ALL56146 ..... 29" Center-To-Center
Heavy Duty 3/4" Chrome Moly Rod Ends Heavy duty or often referred to as
ALL56147 ..... 30-1/2" Center-To-Center ALL56148 ..... 32-3/4" Center-To-Center Cut-To-Fit J-Bar Style Panhard Bars
“Aircraft Style”, these 4130 chrome moly rod ends have larger bodies, making them thirty percent stronger than standard 3/4" rod ends. These rod ends are commonly used on Panhard bars and lower strut rods. ALL99314 ..... RH Male, 3/4" x 3/4"-16 ALL99315 ..... RH Female, 3/4" x 3/4"-16
Cut-to-fit bar is an unwelded kit that allows building a custom
ALL99314
ALL99315
length J-Bar with up to a 27" long center-to-center distance, enough to work with most chassis. Bar is
formed from .250" wall, 1-1/2" diameter steel tubing, has a 4" drop, includes a threaded insert and rod ends. ALL56141 ..... Bar With Standard Rod Ends ALL56142 ..... Bar With Aircraft Rod Ends ALL56143 ..... Replacement 3/4"-16 Insert Adjustable J-Bar Style Panhard Bars Bars are formed from 1-1/2" steel tubing
Panhard Bar/Third Link Brackets
Brackets have a built-in arch for adjust- ment of the Panhard bar or third link angle without changing the length of the arm. Brackets are 1/8" thick. Sold as a pair. ALL60162... 6-Hole Brackets With 1/2" Holes ALL60163... 6-Hole Brackets With 5/8" Holes ALL60165... 6-Hole Brackets With 3/4" Holes ALL60167... 5-Hole Brackets With 3/4" Holes Weld-On Panhard Bar Bracket ALL60168 Bracket is made from 1/4" steel and has six 3/4" mount holes for Panhard bar. Measures 8-1/2" tall by 2" wide. ALL60162 ALL60163 ALL60165
Aircraft Rod End
Standard Rod End
ALL60167
and mount to the pinion rather than the axle tube to maintain adequate driveshaft clearance. J-bars have 3/4" rods ends and allow up to 2" of adjustment. Part No. Drop Description ALL56155 4" 17-1/2"-19-1/2", 6.2 Lbs. ALL56156 4" 19-1/2"-21-1/2", 6.2 Lbs. ALL56153 6" 17-1/2"-19-1/2", 6.7 Lbs. ALL56154 6" 19-1/2"-21-1/2", 7.0 Lbs. Replacement Parts ALL99050..... Replacement Threaded Adjuster ALL99052..... Adjuster Nut ALL58072..... 3/4" Male Moly Rod End Adjustable Panhard Bar Wrench ALL11192 Wrench is designed to work with adjustable Panhard bars with 1-3/8" adjusters. Shorter than a standard wrench, this wrench is convenient for making adjustments in tight areas.
David Mielke
Photo: Jim DenHamer
Jason Feger
Photo: Ken Kelly Jamison Russell
Photo: RW Motorsports
www.allstarperformance.com
202
Made with FlippingBook flipbook maker