Clamp-On Panhard Bar Brackets Adjustable steel or aluminum brackets clamp to square tubing, providing multiple Panhard bar mounting locations. Brackets are tapped for 3/4"-10 bolts. Steel brackets have outer holes 5" apart. Aluminum brackets have outer holes 5.5" apart. Hole measurements are center-to-center. Steel Brackets ALL60240..... For 2" x 2" Tubing ALL60244..... For 1-1/2" x 1-1/2" Tubing Aluminum Brackets ALL60243..... Straight, 2.5 Lbs., For 2" x 2" Tubing ALL60245..... Angled, 2.0 Lbs., For 2" x 2" Tubing Aluminum Radiused Climbing Style Frame Mount Panhard Bar Brackets Easily adjust your Panhard bar with only one wrench! Climbing style adjuster allows any amount of adjustment without having to remove or realign any spacer/tabs. Features radiused slot so you don’t have to re- square the rear end after adjustments. Aluminum brackets fit 2" x 2" tubing. ALL60246..... Inside/Outside Mounting (Most modifieds and GRT) ALL60247 ..... Center/Inside Mounting (Mastersbilt, Barry Wright, Hughes) ALL60248..... Outside /Center Mounting (Rocket)
Internal Screw Style Panhard Bar Adjusters ALL56152 A screw bolt style adjuster is welded inside of the tube. When welded in place of current mount, Panhard bar can be easily adjusted by turning the screw bolt. Attach Panhard bar to this adjuster with ALL60183 Clevis (not included). Rear Panhard mount, 21" tall with 3" of Adjustment. Aluminum Panhard Bar Clevis Aluminum clevis clamps around a chassis tube and connects to the 3/4" rod end on the long end of a J-bar style Panhard bar. After loosening the two Allen bolts, the clamp may be slid up or down on the chassis tube to adjust the bar and change roll center.
ALL60240
ALL60245
ALL60183
ALL60182 ..... 1-1/2" I.D. ALL60183 ..... 1-3/4" I.D.
Remote Adjustable Panhard Bar Mounts Easily adjusted on frame side of Panhard bar, mount has a threaded shaft and fastens to 1-3/4" diameter tubing. Standard mount kit has 2" of adjustment, drop mount kit has 5" of adjust- ment. Each turn of the shaft
ALL60247
moves mount .100". Extension rod may be mounted in rear window or decking for quick, easy adjustments from outside of the car. Mounting hardware and a 3/4" Panhard bar bolt are included. ALL60270 ..... Standard Mount Kit ALL60273..... Drop Mount Kit Replacement Items: ALL60272 .... Extension Rod With Bushing For ALL60270/ALL60273 ALL60274 ..... Flange Bearing
Steel Radiused Climbing Style Frame Mount Panhard Bar Brackets
Steel climbing style adjuster mounts to chassis square tubing and permits Panhard/ J-bar adjustment
ALL60270
ALL60273
without removing or realigning spacers or tabs found on other mounts. Radiused slot eliminates the need to re-square the rear end after adjustments. ALL60238..... For 1-1/2" Tubing, Inside and Outside Mounting ALL60239..... For 2" Tubing, Inside and Outside Mounting ALL60237
ALL60239
Scott Bloomquist
Photo: Marcus Berglund
www.allstarperformance.com
203
Made with FlippingBook flipbook maker