Quick Change 5-Hole Panhard Bar Bracket ALL60170
Quick Change Pinion Mount Panhard Bar Brackets Pinion mounted brackets have a cam style adjuster for quick and easy setup of the Panhard or J-bar. Single cam adjuster features a cog style adjuster nut and threaded back nut that slides with adjuster for easy single wrench adjust- ment. Double cam adjuster has cog style front and rear adjusters that are keyed together for smooth adjustments. Aluminum mounts replace the front pinion plate on most quick change rear ends and the steel mount is used with the original pinion plate. Radiused mounting slots eliminate the need to adjust J-bar or Panhard bar length. ALL60285..... Aluminum Bracket, Single Sided, Single Cam ALL60286..... Aluminum Bracket, Double Sided, Single Cam ALL60287..... Single Sided Steel, Double Cam*
Bracket mounts to all standard quick change rear ends with six bolts. Made of 1/2" thick
steel, bracket has five 3/4" Panhard bar mounting holes for up to 5" of adjustment.
ALL60285
Quick Change Panhard Bar Bracket ALL60275
ALL60287
Replaces the front seal plate/bearing retainer on most quick changes to add 4" of adjustment. Includes yoke seal, O-ring, spacers and 3/4" lock nut. Replacement Parts ALL99112 ..... Stud
ALL60289
ALL60288..... Aluminum Bracket, Single Sided, Double Cam ALL60289..... Aluminum Bracket, Double Sided, Double Cam *Steel bracket designed for use with original or factory pinion plate
ALL99113 ..... Large Spacer ALL99114 ..... Small Spacer ALL99115 ..... O-Ring
Climbing Pinion Cover Plate Kit ALL72078 Kit includes a 2-piece cover and mounting hardware to reduce mud build-up in the machined pocket area of Allstar alu- minum pinion mount Panhard bar brackets.
Quick Change Panhard Bar Bracket ALL60280
Bracket has arched, serrated slots for easy adjustment. Designed by Scott Bloomquist. Replacement Part ALL60282..... Replacement Bolt And Spacers
Quick Change Bracket ALL60181 Clamp-on bracket mounts on left side tube of quick change to con-
nect Panhard bar. Change roll center height by loosening clamp and pivoting bracket up or down. Measures 11-3/4" from housing to end of bracket, 3/4"-16 threads. Grade 5 hardware with Nyloc nuts included.
Ford 9" Panhard Bar Bracket ALL60180 Bracket connects Panhard bar to Ford 9" axle housing with 3" O.D. axle tubes. Roll center height can be changed by loosening clamp and pivoting
bracket up or down. Measures 7-3/4" from housing to end of bracket, 3/4"-16 threads. Grade 5 hardware with Nyloc nuts included.
Zeke McKenzie
Photo: STL Racing Photos
www.allstarperformance.com
204
Made with FlippingBook flipbook maker