Rod Ends Two-piece spherical rod ends have a pivoting steel ball and are sold each. Bore x Thread RH Male LH Male RH Female Strength Standard Series Steel 1/4" x 1/4"-28 ALL58004 ALL58014 ALL58034 2,835 Lbs 5/16" x 5/16"-24 ALL58005 ALL58015 ALL58035 4,517 Lbs 3/8" x 3/8"-24 ALL58006 ALL58016 ALL58036 6,323 Lbs 1/2" x 1/2"-20 ALL58008 ALL58018 ALL58038 10,046 Lbs 5/8" x 5/8"-18 ALL58010 ALL58020 ALL58040 15,488 Lbs 3/4" x 3/4"-16 ALL58012 ALL58022 ALL58042 15,894 Lbs 3/4" x 3/4"-16 ‡ ALL58013 ‡ – – 15,894 Lbs Pro Series Steel (Moly) – Black 1/2" x 1/2"-20 ALL58058 ALL58068 – 17,000 Lbs 1/2" x 5/8"-18 ALL58059 ALL58069 – 19,300 Lbs 5/8" x 5/8"-18 ALL58060 ALL58070 – 18,000 Lbs 3/4" x 3/4"-16 ALL58062 ALL58072 – 25,000 Lbs Pro Series Steel (Moly) – Black (PTFE Lined) 1/2" x 5/8"-18 ALL58079 ALL58084 17,650 Lbs 5/8" x 5/8"-18 ALL58080 ALL58085 15,200 Lbs 3/4" x 3/4"-16 ALL58082 ALL58086 21,400 Lbs Aluminum – Black 1/2" x 1/2"-20 ALL58088 ALL58098 – 7,700 Lbs 1/2" x 5/8"-18 ALL58089 ALL58099 – 15,000 Lbs ‡ALL58013 has an oversized hole and is for use with steering shaft tubing.
Jam Nuts - Standard Hex Allstar jam nuts have many uses. Great for locking rod ends tightly on suspension tubes or rack and pinion steering units. Package of 4, unless noted. Size Steel Aluminum 1/4"-28 RH ALL18250 – 1/4"-28 LH ALL18251 – 5/16"-24 RH ALL18252 – 5/16"-24 LH ALL18253 – 3/8"-24RH ALL18254 ALL18274 3/8"-24 LH ALL18255 ALL18275 7/16"-20 RH ALL18256 ALL18276 7/16"-20 LH ALL18257 ALL18277 1/2"-20 RH ALL18258 ALL18278 1/2"-20 LH ALL18259 ALL18279 5/8"-18 RH ALL18260 ALL18280 5/8"-18 LH ALL18261 ALL18281 3/4"-16 RH ALL18262 ALL18282 3/4"-16 LH ALL18263 ALL18283 3/4"-10 RH ALL18264 †‡ – 7/8"-9 RH ALL18266 † (Sway Bar Adj. Nut) – 1"-8 RH ALL56110 † (Jack Bolt Nut) – †Sold Each. ‡Commonly used with UBM35-1107, 3/4"-10 jack bolt.
Steel Jam Nut Assortments
Heavy Duty 3/4" Chrome Moly Rod Ends Heavy duty or often referred to as “Aircraft Style”, these 4130 chrome moly rod ends have larger bodies, making them 30%t stronger than stan- dard 3/4" rod ends. These rod ends are commonly used on Panhard bars and lower strut rods. ALL99314 ..... RH Male, 3/4" x 3/4"-16 ALL99315 ..... RH Female, 3/4" x 3/4"-16
Assortments contain five each of 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 5/8"-18 and 3/4"-16.
ALL18290 ..... 35 Asst. RH Jam Nuts ALL18291 ..... 35 Asst. LH Jam Nuts Jam Nuts - Small Hex
ALL99314
ALL99315
Specialty jam nuts have smaller outside diameters, allowing smaller wrenches to
be used when changing radius rod lengths. Example: with 1/2" bolts the same 3/4" wrench can be used to adjust radius rod or mounting hole locations. Package of 4. Thread Size Wrench Size Steel Alum. Black Alum. 5/8"-18 RH 3/4" ALL18292 ALL18296 ALL18286 5/8"-18 LH 3/4" ALL18293 ALL18297 ALL18287 3/4"-16 RH 15/16" ALL18294 ALL18298 ALL18288 3/4"-16 LH 15/16" ALL18295 ALL18299 ALL18289
3/4" Solid Rod End ALL58112 Solid rod ends are built using 1045 steel and are then chrome plated for added wear resistance. End has a body width of 7/8" to match the width of standard rod ends.
Bolt Center Caps ALL10678 Caps slip over the head of standard 1/2" bolts to accurately measure the center-to-center length of installed suspension tube assemblies.
Machined step secures the end of a standard tape mea- sure for easy reading of the length to the center of the opposite cap. Caps feature a built-in O-ring that allows the cap to swivel on the bolt head and keeps it from falling off. Package of 2.
Paulie Colagiovanni
www.allstarperformance.com
210
Made with FlippingBook flipbook maker