High Misalignment Reducer Spacers Dual purpose spacers reduce fastener size mounting hole and allow
Aluminum Flat Spacers Flat spacers are great for shimming and adding additional clearance to brackets for
brake calipers, power steering, alternators, dry sump pumps or just about anything to help with alignment issues. Package of 2. Thickness 3/8" I.D. (11/16" O.D.) 1/2" I.D. (1" O.D.) 1/8" ALL18740 ALL18760 1/4" ALL18742 ALL18762 3/8" ALL18744 ALL18764 1/2" ALL18746 ALL18766 Tapered Spacers Universal spacers have many uses including spacing rod ends on linkages to prevent binding or just to provide clearance. Spacers provide a finished look when fitting body panels or spacing components away from floors and firewalls. Package of 2. I.D. Small O.D. Large O.D. Length Steel Aluminum 1/4" .345 .500 1/4" – ALL18700 1/2" – ALL18702 5/16" .475 .625 1/4" – ALL18706 1/2" – ALL18708
the rod end to rotate more than 30° in each direction, which is 25% more than most standard spacers. Stainless steel spacers resist rust and corrosion. Package of 2.
Rod End
O.D. “A”
Length “B”
Overall Width “C” Part No.
Size I.D.
5/8" 1/2" .750" .465" 3/4" 1/2" .890" .475" 3/4" 5/8" .890" .475"
1.68"
ALL18785 ALL18786 ALL18787
1.825" 1.825"
5/8" Rod End Reducer Spacers Reducer spacers fit into 5/8" rod ends, reducing the hole size for 1/2" hardware while also spacing the rod end away from chassis brackets. ALL18615
1/4" 1/2"
– – –
ALL18712 ALL18714 ALL18716
ALL18612
3/8"
.525
.680
Standard spacers are 3/4" O.D. and flanged spacers have 1" O.D. flanges to help support rod end. Size referenced indicates the amount of space between rod end pivot ball and chassis bracket. Package of 2. Standard Spacers
1"
1/4" ALL18570 ALL18590 3/8" ALL18571 – 1/2" ALL18572 ALL18592 3/4" ALL18574 ALL18594 1" ALL18576 ALL18596 1-1/2" ALL18578 ALL18595 1/4" ALL18580 ALL18597 1/2" ALL18582 ALL18598 3/4" ALL18584 ALL18599 1" ALL18586 – 1-1/2" ALL18585 –
1/2"
.740
.995
ALL18615...... Aluminum, 1/2" ALL18617...... Aluminum, 1" ALL18618...... Aluminum, 1-1/4" ALL18619...... Aluminum, 1-3/4" Flanged Spacers ALL18611...... Aluminum, 1/4" ALL18613...... Aluminum, 1/2" ALL18610 ..... Steel, 1/4" ALL18612...... Steel, 1/2" Rod End Reducer Bushings
5/8"
.825
.995
1/2" ALL18587 3/4" ALL18588 1" ALL18589
– – –
3/4"
.950
1.125
Steel bushings reduce the rod end pivot ball I.D. to accept a smaller bolt size. O.D. To I.D. 2-Pack
10-Pack
1/2" To 3/8" 5/8" To 1/2" 3/4" To 1/2" 3/4" To 5/8"
ALL18565 ALL18566 ALL18567 ALL18568
ALL18565-10 ALL18566-10 ALL18567-10 ALL18568-10
Jimmy Mars
Photo: Ken Kelly
Shock Spacers Steel spacers have a 1/2" I.D. and 3/4" O.D. and can be used in a variety of other locations. Length 2-Pack 10-Pack
25-Pack
1/4" 1/2" 5/8" 3/4"
ALL64280 ALL64282 ALL64283 ALL64284
ALL64280-10 ALL64280-25 ALL64282-10 ALL64282-25 ALL64283-10 ALL64283-25 ALL64284-10 ALL64284-25
Sam Mars
Photo: Fizzle
www.allstarperformance.com
211
Made with FlippingBook flipbook maker