Weld-On Trailing Arm Brackets Weld lower rear mount brackets to 3" axle tube to mount coil-overs and trailing arms. Brackets are 1/4" thick steel with 1/2" shock hole. Available with either 3/4" trailing arm holes or a 2" long slot.
Clamp-On Trailing Arm Brackets Steel brackets clamp on 3" axle tube for attachment of
ALL60122 Bracket with three trailing arm holes.
coil-over shocks and trailing arms. Available with two 3/4" holes or a 2" slot. Grade 5 hardware and Nyloc nuts included. ALL60134 ..... Bracket With Two 3/4" Holes ALL60135 ..... Bracket With 2" Slot Clamp-On Trailing Arm Bracket ALL60136
ALL60126 Bracket with two trailing arm holes.
Universal bracket mounts coil-over eliminator and shock next to axle and
mounts trailing arm 4-1/2" below axle centerline, either inside or outside of bracket. Allows Limited Late Models and Modifieds to be changed from coil-over to coil- over eliminator and shock. Grade 5 hardware and Nyloc nuts included.
ALL60128 Bracket with 2" slot.
Weld-On Trailing Arm/ Shock Brackets
Clamp-On Trailing Arm Bracket Steel bracket clamps on
Flame cut 1/2" thick steel brackets weld to 3" diam- eter axle tube, providing mounting points for trailing arm and shock. Brackets have two 3/4"-10 threaded
3" axle tube to provide mounts for shock, trailing arm and 5" O.D. coil spring. Grade 5 hardware included.
holes to mount trailing arm and a 1/2" diam- eter hole with spacer for mounting a shock.
ALL60110
ALL60110 ..... LH Bracket ALL60111...... RH Bracket
ALL60140 ..... LH Bracket ALL60141 ..... RH Bracket Clamp-On Trailing Arm Bracket ALL60138 Aluminum bracket clamps to a 3"
diameter axle tube, has three 3/4"-10 mounting holes for trailing arm loca- tion and a 1/2"-13 socket head bolt with two 1/4" spacers for mounting a coil over shock. An additional locking bolt
installs into the axle tube to help prevent the bracket from turning. May be used on the right or left hand side of housing, 3.4 lbs.
Chad Simpson
Photo: Todd Healey
www.allstarperformance.com
214
Made with FlippingBook flipbook maker