Top View
Lower Spring Cups Steel spring cup has a 7" wide curved base that welds to the top of a 3" diameter rear end axle tube creating a flat mounting surface for 5" O.D. racing springs Commonly used to replace OE style “pigtail” lower spring mount. Sold each. ALL56124 ..... Standard Cup ALL56123 ..... Lightweight Cup NEW!
U-Bolt Pads Universal style u-bolt pads fit 3" diameter axle
ALL60037
ALL60036
ALL60038
ALL56124
tubes and leaf springs up to 2-1/2" wide using 1/2" u-bolt fasteners. Center alignment hole is 5/8" to accept most lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted shock mount with a welded bung to accept 1/2" mounting hardware.
NEW Lightweight Version!
ALL60036..... RH Pad ALL60037..... LH Pad ALL60038..... Dual Mount Pad Leaf Spring Slider Box ALL60034 Leaf spring slider box replaces con- ventional leaf spring shackles to enable effortless suspension movement and prevent
ALL56123
Leaf Spring Pad ALL56126 Steel pad welds to 3" diameter rear end axle tube when mounting rear end to most leaf springs. Pad is 2-1/2" W by 5-3/4" L and has a 5/8" center pilot hole. Sold each.
binding. Box may be welded or bolted directly to chassis, and includes two nylon bushings with spring mounting hardware. Fits 2-1/2" wide Chrysler type leaf springs. Replacement Parts ALL99055..... Bushings, 2-Pack Leaf Spring Slider Box ALL60035 Replace rear leaf spring shackles with
Clamp-On Lower Spring Pad ALL56127
Steel clamp-on leaf spring pad fits 3" diameter axle tubes. Pad measurements are the same as ALL56126. Sold each.
Allstar’s leaf spring slider box. Bolt-in slider box with roller bearing design eliminates leaf spring binding, freeing up car. Fits 2-1/2" wide Chrysler type leaf springs. Leaf Spring Shackles 6-hole brackets for mounting leaf springs are 9" L x 2" W and have 1/2" diameter holes spaced 1" on center. Package of 2. ALL60055..... Steel 1/4" Thick ALL60056..... Aluminum 3/8" Thick Wheelie Bar Wheels Billet 6061-T6
Aluminum Lowering Blocks Easily adjust ride height on leaf spring cars. Standard and adjustable styles are available in extruded or billet alu- minum. Blocks are 2-1/2" W x 5" L. Sold each. Part No. Height Pin Dia. Extruded Aluminum ALL56130 1" 9/16" ALL56131 1-1/2" 9/16" ALL56132 2" 9/16" ALL56133 2-1/2" 9/16" ALL56134 3" 9/16" Billet Aluminum ALL56060 3/4" 5/8" ALL56061 1" 5/8" ALL56062 1-1/2" 5/8" ALL56063 2" 5/8" ALL56064 2-1/2" 5/8" ALL56065 3" 5/8" ALL56136* 1-1/2" Adj. 5/8" ALL56138* 2-1/2" Adj. 5/8" ALL56131
ALL60055 ALL60056
aluminum wheels are
ALL56065
molded with a durable 4" O.D. polyurethane
tire that will not dent or give like a rubber tire. Wheels are available with or without bearings and accept 3/8" mounting hardware. Mounting width: non-bearing wheel
*Pins on blocks can be adjusted 1-1/4" to the front or rear of center position.
ALL56136
is 1-5/8", bearing style wheel is 1-1/4". Without Bearings (1.625" Wide Mount) ALL60510 ..... 5-Spoke ALL60512 ..... 5-Hole ALL60514 ..... 10-Spoke With Bearings (1.250" Wide Mount)
Leaf Spring U-Bolt ALL68344 Leaf spring u-bolt fits 3" axle tubes, has a 1/2" diameter and is 10" long. Heat treated steel bolt is sold each.
ALL60511 ..... 5-Spoke ALL60513 ..... 5-Hole ALL60515 ..... 10-Spoke
www.allstarperformance.com
217
Made with FlippingBook flipbook maker