Hood Scoops
Dragster Scoop Trays Scoop tray is the lower portion of the scoop or plenum that directs air into the carburetor when used with NEW!
dragster style scoops. Tray measures 21-5/8" L x 13-1/2" W and requires a separate scoop tray mount which supports the tray above the carbu- retor providing a secure mounting point for scoop. Flat Mount ALL23266..... Aluminum Tray for 4150 Series Carb ALL23267..... Aluminum Tray for 4500 Series Carb Raised - 3" Tall ALL23268..... Aluminum Tray for 4150 Series Carb ALL23269..... Aluminum Tray for 4500 Series Carb ALL23288..... Fiberglass Tray for 4500 Series Carb Scoop Tray Mounts
ALL23233
ALL23233
NEW DESIGNS!
ALL23268
ALL23237
ALL23246
Scoops are molded from durable high impact plastic with carbon fiber look and have a molded-in flange for easy mounting. Designed for use with 14" air cleaners, scoops protect air cleaners that protrude through the hood from dirt and debris. All scoops surround approximately half of the air cleaner assembly.
Scoop tray mounts offer an all in one solution to mount a scoop tray, throttle, and nitrous solenoids. Mounts provide a clean look, eliminating the need to use multiple brackets, mounts and gaskets. CNC machined from 6061 aluminum, black anodized. ALL54302..... 4150 ALL54304..... 4500 ALL54306..... 4150 With Nitrous Solenoid Mounts ALL54308..... 4500 With Nitrous Solenoid Mounts Dial-In Boards
Center of A/C to Front of Scoop
Part No.
Description Height
ALL54304
ALL23230 Short Tapered Front 2-1/2" ALL23232 Short Tapered Front 3-1/2" ALL23246 Long Tapered Front 3-1/2" ALL23247 Long Tapered Front* 3-1/2" ALL23248 Long Tapered Front 5-1/2" ALL23249 Long Tapered Front* 5-1/2"
12" 13" 17" 17" 18" 18"
ALL23233 ALL23235 ALL23237
Open Front Flat Front Flat Front
3-1/2" 3-1/2" 5-1/2"
12-1/2" 15-1/2"
ALL54308
18"
*Mounting flange has a slight curvature for rolled hoods
Aero Scoops Aerodynamically designed fiberglass scoops are strong yet lightweight with a durable,
Dial-in boards are a great alternative to messy shoe polish when displaying your ET dial-in. Highly visible
ALL23284
black high-gloss, seamless gelcoat finish and a 2" wide mounting flange. Open back scoops have an angled 6" tall rear opening to fit most windshields.
3" tall white numerals help to ensure correct times are entered at the tower. Each numeral has seven pivoting sections that are easily changed to quickly adjust dial-in time. Available with mounting holes for a standard dial-in board bracket or ALL23293 with suction cups and hook/ loop tape. ALL23291..... 3 Digit w/Mount Holes ALL23292..... 4 Digit w/Mount Holes ALL23293..... 4 Digit w/Suction Cups And Hook/Loop Tape
Overall Height
Overall Length
Width w/o Flange
Part No. Description
ALL23280 Open Back 13-1/2"
50" 50" 38"
14-1/2" 14-1/2" 14-1/2"
ALL23282 Open Back ALL23284 Closed Back
13" 12"
Dragster Scoops Strong yet lightweight, fiberglass
scoops have a durable, black high-gloss, seamless gelcoat finish. Complete installation on 4500 series carburetors requires a scoop tray mounting kit, which mounts between carb and intake manifold to secure ALL23288 scoop tray. Scoops are typically secured to tray with quick turn fas- teners and hardware (sold separately).
Dial-In Board Mounts Two-piece billet aluminum mount fits dial-in boards with 8.75" x 3" mounting hole pat- terns. Top portion of bracket swivels to position board at the
ALL23272
ALL23297
best viewing angle. ALL23297..... Black ALL23298..... Polished
Overall Length
Part No. ALL23270 ALL23272 ALL23274
Overall Height
Width
Dial-In Board Sold Separately
16"
33"
14" 14" 14"
15-1/2" 20-1/2"
25-1/2" 29-1/2"
www.allstarperformance.com
20
Made with FlippingBook flipbook maker