Double Flare Tool ALL11015 Double flares 3/16", 1/4", 5/16", 3/8" and 1/2" steel or aluminum and .040" copper tubing at 45°, the most common flare used in custom brake and fuel lines. Includes detailed instructions and a con- venient plastic storage case. 37° Flaring Tool ALL11016 This -AN fitting flare tool is essential when working with 37° flared fittings. Tool for use with soft copper, aluminum and brass tubing will precisely flare from -3AN to -10AN and 3/16" to 5/8".
Brake Bleeder Bottles Contain the mess of bleeding brakes by capturing fluid in this 16 oz. bottle with a 15" long hose which attaches to most bleeder screws. The removable cap has a built-in fitting to
secure the hose during storage to help prevent spills. Choose from a steel lanyard retainer that suspends the bottle from a chassis or suspension component, or a magnet
ALL11019 ALL11018 ALL11017
retainer to secure the bottle to a steel object such as a brake drum or rotor during bleeding. ALL11017 has a magnet retainer and a built-in one way check valve for one person brake bleeding. ALL11019...... Bottle With Lanyard ALL11018...... Bottle With Magnet ALL11017...... Bottle With Magnet And Check Valve ALL99435..... Replacement Hose NEW!
Brake Pressure Gauge ALL11020 Gauge temporarily replaces the bleeder screw in most aftermarket brake calipers with 1/4"-28 thread bleeder screws to measure brake pressure. Swivel head positions the 2-3/4" diameter gauge for easy viewing. Convenient remote bleeder can be used to evacuate air in the system for accurate readings. Related Part ALL11022...... Adapter converts ALL11020 and other
Circle Track Set Up Book ALL043 Track important
chassis settings with this 4" x 5" pocket size spiral bound book. Each book has 50 carbon backed pages perforated for easy tear off.
gauges with 1/4"-28 thread to 10mm-1.50 thread for use with popular GM Metric calipers.
ALL11022
Brake Pressure Gauge Kit ALL11026
Circle Track Set Up Sheets ALL045 Keep detailed notes and log important information with Allstar set up sheets. Sheets have blank spaces for docu- menting chassis informa-
Brake pressure gauge kit includes two gauges, allowing one gauge to be used in the front and one
in the rear brake system. Compare front to rear pressures to help diagnose problems or to preset your brake bias. Gauges easily replace 1/4"-28 brake bleeders which are commonly found in most aftermarket calipers.
tion such as caster, camber, shock settings, spring rates, tire size and air pressures. 50 sheets per 8-1/2" x 11" tablet.
Hard Brake Line Display Rack ALL052 Display, organize, and inven- tory many lengths of 3/16" steel brake line. Rack measures 17" wide, and has 21 slots which hold 6 pieces each. Pre-punched mounting holes provide easy mounting on wall or display fixture. Not for use with braided brake lines.
Drag Racing Log Book ALL046 Keep detailed notes and log important information. Sheets are designed for documenting engine tuning and chassis settings, as well as weather conditions, race results and more. 50 sheets per 8-1/2" x 11" tablet.
www.allstarperformance.com
224
Made with FlippingBook flipbook maker