Valve Spring Compressor ALL96490 Adjustable C-clamp style compressor will fit most heads including Hemi. Spring cup will fit stock springs up to 1.750" diameter and has a 1.100" “working window” for access to keepers, which may be too large for some small diameter spring/retainer combinations. Compressor has 9/16" hex for use with a wrench, ratchet or impact. This tool will handle spring pressures in excess of 1200 lbs. without slipping off.
Spark Plug Index Shims
Stackable shims index spark plugs at 30° intervals up to 360° properly positioning ground strap in cylinder head for increased power and clearance between spark plug
and piston. Shims are intended for use with 14mm flat seat spark plugs only. Package of 24 shims contains 12 silver 60°, 12 black 90°, detailed instructions and dial chart. ALL96505..... Shim Kit, Standard O.D. (.800") ALL96506..... Shim Kit, Small O.D. (.720")* *Shims are designed for close tolerance spark plug pockets such as those on ALL-PRO cylinder heads. Spark Plug Gap Tool ALL96515
Feeler Gauges Use in engine assembly to check con- necting rod side clearance, piston ring end gap, spark plug gap and valve lash.
Used to set consistent plug gap. Insert plug into holder, then put feeler gauge between ground strap and electrode. Gently turn knurled knob until feeler gauge is snug. Spark Plug Gap Tool Kit ALL96516 Spark plug gap tool quickly and accurately gaps 14mm threaded spark plugs. Thread spark plug into tool, place the correct size feeler gauge beneath the ground strap, then tighten knob to set plug gap. Includes 17 different feeler gauge sizes .010" thru .035". Port And Polish Kit ALL11052 Kit includes an assortment of 60, 80 and 120 grit cartridge rolls for cleaning and modifying intake and exhaust ports to match gaskets, remove casting marks and for smoothing out runners. Two 1/4" mandrels are included with each kit.
Gauges have Metric and SAE sizing designations etched in each blade. Choose straight or angled sets.
ALL96420..... Straight ALL96421..... Angled
Valve Lash Wrenches Allstar Valve Lash Wrenches save
precious time and eliminate fumbling with two separate wrenches. Available for Jesel, T&D and other poly-lock style rocker assemblies. ALL96400 .... 7/16" Box Wrench, 1/8" Allen Wrench, Jesel Assemblies ALL96401..... 1/2" Box Wrench, 3/16" Allen Wrench, T&D Assemblies ALL96402..... 9/16" Box Wrench, 3/16" And 7/32" Allen Wrenches ALL96403..... 5/8" Box Wrench, 3/16" And 7/32" Allen Wrenches Remote Starter Switch Kit ALL76205 Kit includes a low profile, steel
cased foot pedal with 8' cord and assorted wire ends to work with many applications. Provides hands free engine cranking when adjusting valves.
Dykem Layout Fluid ALL12070 Apply layout fluid to the work surface to enhance visibility of scribes during fabrica- tion. Blue fluid dries in minutes to a uniform, thin film without cracking or chipping. 4 oz. container has a built-in brush under cap. Not intended for use in set up of ring and pinion gear sets. SB Chevy Engine Covers Covers protect engines during storage or transport. 1/8" thick polycarbonate material is formed to fit most small block Chevy applications. Short block cover fastens over cyl-
Remote Starter Button ALL76206 Kit is very helpful for valve lash main- tenance when the ignition panel can’t be reached. Leads are 60" long and come complete with gator clamps to connect to starter solenoid. Spark Plug Indexing Tool ALL96510 Indexing positions the ground strap of the spark
ALL96532
inder head alignment dowels. Manifold cover is designed to replace manifolds with stock port locations and bolt pattern. ALL96530..... Short Block Cover ALL96532..... Manifold/Valley Cover
plug properly for best piston dome clearance
and un-shrouds the electrode for a more even burn and possible gains of 5-15 horsepower. Works with flat gasket or taper seat 14mm spark plugs. Includes instructions.
ALL96530
www.allstarperformance.com
227
Made with FlippingBook flipbook maker