Bolt Center Caps ALL10678 Caps slip over the head of standard 1/2" bolts to accurately measure the center-to-center length of installed
Shock Eye Socket ALL64255 The ideal tool for shock rebuilders or anyone that dis- assembles shocks on a regular basis! Unique socket safely
suspension tube assemblies. Machined step secures the end of a standard tape measure for easy reading of the length to the center of the opposite cap. Caps feature a built-in O-ring that allows the cap to swivel on the bolt head and keeps it from falling off. Package of 2.
removes and installs the shock rod end without risk of damage to the spherical ball. Steel socket contacts the outer housing of 1/2" rod ends up to .640" wide and has a 1/2" drive for ratchet or impact use.
Suspension Tube Set Up Tool ALL10676
Shock Workstations The all-in-one shock workstations hold shock bodies in the upright position for ease of
Slide rule device quickly measures and duplicates suspen- sion or steering tube distances with 1/2", 5/8" and 3/4" rod ends. Set-up tool has an engraved scale with 1/16" increments for durability and accuracy.
ALL64264
shaft removal or assembly and hold shock shafts vertical or horizontal for easier repairs or revalving. Workstations are constructed of aluminum, can be placed in a vise, and have 1/4" threaded holes for custom mounting.
Rod End Centering Kit ALL10672 Compact inserts are placed into rod ends of suspension, steering
ALL64263..... Single Shock Workstation ALL64264..... Double Shock Workstation Shock Workstation Base ALL64267 Steel base is helpful when mounting Allstar workstation (ALL64264) in a trailer or to a shop workbench. Mounting hardware included.
or other tube assemblies to quickly measure and adjust on the workbench or other flat surface with any standard tape measure. Inserts can be used on assemblies with 1/4", 3/8", 1/2", 5/8" and 3/4" rod ends. Ride Height Blocks Chassis set-up blocks are adjustable in 1/4" increments. A quick release pin holds block at desired height. Bottom surfaces of blocks are contoured to fit steel tubing or any flat surface and have magnets for holding block to chassis. Short blocks adjust 1.75"-4". Tall blocks adjust 3"-6". Package of 2. ALL10720 ..... Short ALL10721 ..... Tall Ride Height Block Adapters ALL10722 Adapters replace the standard flat pad on Moose style set up blocks and are machined to cradle axle tubes during chassis set-up. Package of 2.
Shock Drip Cup ALL64265 No more messy oil soaked rags or shock oil dripping onto the workbench. Shock drip cup has a specially designed rubber seal that conforms to a broad range of shocks and holds cup in place. Fits 1-1/2" to 2-1/8" O.D. shock bodies. Replacement Part ALL99290..... Drip Cup Seal Shock Racks Shock rack holds four shocks with 2-1/2" springs and easily mounts to trailer, shop wall or pit cart. Rack is designed to hold shocks in place by pushing shock rod end or eye over the outer O-ring or alternatively, the outer O-ring may be removed to expose a predrilled hole for a hairpin clip such as ALL18442, sold separately. ALL12212...... Standard Rack ALL12211...... Adjustable Base Rack Replacement Part ALL12213...... Shock Pin, O-Ring and Bolt Related Part ALL18442 ..... 1-5/8" Hairpin, 2-Pack
Ride Height Block Cradle Rollers ALL10723
Built-in rollers allow live axle rear-ends to rotate while on the cradles or when using the rear axle to rotate the engine to check or adjust the valve train. Package of 2. Shock Inflation Tool ALL64260 Tool threads onto shock Schrader valves. Fill valve and 0-300 PSI gauge head independently rotate a full 360°, for easy filling and reading. Complete with built-in bleeder and includes a protective storage case.
ALL12211
ALL12213
ALL18442
www.allstarperformance.com
247
Made with FlippingBook flipbook maker