Bench Yoke ALL11360 Bench yoke mounts to a work- bench to hold transmissions, rear ends, differentials and
Quick Change Tube Install/Removal Tool ALL11350 Finally, an easy and correct way to install and remove quick change axle tubes. Secure support tool into a vice or to a workbench with optional brackets. Components are included to remove and install tubes with the turn of a wrench. An adapter for tubes with Wide 5 or 5 x 5" hubs is also included. Related Parts ALL11355...... Installation End Cap For Bolt-On and 2-7/8" Pin Wide 5 Tubes ALL11351 ...... Mounting Bracket Kit For Quick Change Tube Install/ Removal Tool Axle Spline Tool ALL66104 Tool clamps in a vise to hold 31-spline axles. Assures perfect alignment for maintenance or installation of axle plugs used with Gold-Trac differentials.
many other items for assembly or servicing. Yoke rotates 360° and features two 10" long pivoting arms that are 1" wide by 1/2" thick. Tool is unpainted so it can be modified as needed.
Rear End Station Brackets ALL10178 Stand adapter brackets fasten to adjustable arms of most engine stands. Supports full size car and light truck rear axle hous- ings when servicing or replacing differential gear
ALL11355
Engine Stand Not Included
sets. Position housing onto arms and secure into place with included retaining straps.
ALL11351
Pinion Centering Jig ALL68370
Pinion centering jig fastens to the rear end housing and locates the pinion centerline when building or narrowing housings. Machined slots are designed to retain most tape measure ends for accurate measure- ments. Applications include GM 12 and 14-Bolt, Dana 44 and 60, Chrysler 8-3/4" and, Ford 8.8" and 9" housings.
T-Handle Axle Puller ALL66115 All-in-one T-handle puller
threads into axle for easy instal- lation or removal. Tool includes adapters to fit 3/8"-16 coarse or 3/8"-24 fine thread solid axles, and 3/4"-16 fine thread gun-drilled axles.
Pinion Yoke Wrench ALL68372 Wrench fastens to most popular pinion flanges and companion flanges to hold when setting bearing pre-load and tightening
Extreme Pressure Lube ALL78246 Originally used throughout the tool and
die industry, this lube provides superior durability and wear protection, taking the place
retaining bolt or nut. Wrench has provisions to work with 1/2" or 3/4" drive tool. Center hole is 2" to clear most sockets. Universal slotted bolt patterns for 1/4", 5/16" and 3/8" fasteners for most AMC, Dana, Ford and GM yokes. Spindle Nut Sockets Aluminum hex style spindle nut sockets fit 1/2" socket wrenches. ALL10110...... 2-3/8" Spindle Nut Socket For 2" Pin, Allstar, PCR 5x5 And Most Wide 5 Hubs ALL10115...... 2-7/8" Spindle Nut Socket For 2-1/2" Pin, Allstar, AFCO, Winters And SCP 5x5 Hubs
of anti-seize in many applications. Recommended for spline-to-spline contact, threaded adjusters and engine fasteners. 4 ounce tube. Quick Change Oil Plug Sockets Six-point sockets fit on a 1/2" drive ratchet to remove or install plugs on quick change rear ends. Small socket fits plugs in most center sections and side bells. Large socket fits plug in Winters Ford 9" housings. Not recommended for high torque applications.
ALL11161
ALL11160...... Small, 1-3/8", Blue Anodized ALL11161 ...... Large, 1-7/8", Red Anodized
www.allstarperformance.com
248
Made with FlippingBook flipbook maker