Flexplates Stock replacement and SFI-approved flexplates are available for small and big block Chevy engines. Gold iridite plated, SFI-approved plates meet 29.1 specs., are .035" thicker than stock and have dual (10-3/4" and 11-1/2") converter bolt patterns unless specified.
Pilot Bushing Install Tool ALL26115 Driver simplifies installation of pilot bushings or bearings for manual transmissions including Muncie, Saginaw, BorgWarner, T-10 and many other popular trans- missions with .590" pilot shafts.
Extended Length Pilot Bushings Use these extra long bushings when distance
ALL26800
ALL26840/ALL26845 plates have a 3-bolt metric converter bolt pattern. SFI flexplates have ring gears welded on both sides.
between engine and bellhousing has increased due to use of mid-plates, rear motor mounts or adapters. Bushings help maintain true alignment of clutch disc to flywheel. ALL26112...... Bronze Bushing ALL26114 ‡ .... Steel Roller Bearing Bushing (has a machined in roller bearing to reduce friction and wear.) ‡ Bearing is shipped dry. Apply a good quality, high-temp grease upon installation. Clutch Alignment Tools Splined, high-impact plastic tools are helpful when aligning the clutch disc on the flywheel for proper insertion of the transmission input shaft.
Stock Replacement
Description
Balanced
SFI
SB Chevy 153-Tooth Internally ALL26835 ALL26830 SB Chevy 153-Tooth, 86-Up Externally ALL26836* ALL26831* SB/BB Chevy 168-Tooth Internally ALL26805 ALL26800 SB Chevy 168-Tooth, 86-Up Externally ALL26806 ALL26801 SB Chevy 400, 168-Tooth Externally ALL26815 ALL26810 BB Chevy 454, 168-Tooth Externally ALL26825 ALL26820 GM LS 3-Bolt, 168-Tooth Internally ALL26845 † ALL26840 † *Single 10-3/4" Torque Converter Bolt Pattern. † Will not fit 1999-2000 6.0L applications with 0.400" extended crank flange originally equipped with flat flexplate and will not fit 4L80E transmissions
Flywheel Locking Tool SB/BB Chevy ALL96426 Place flywheel locking tool onto rear block
ALL14290 ..... 1-1/8" Dia, 10-Spline ALL14292 ..... 1-1/8" Dia, 26-Spline Transmission Stand ALL10174 Avoid damage and fluid leaks during
dowel pins to prevent the flywheel from turning while tightening or loosening balancer bolts, flywheel bolts, clutch/pressure plate bolts or cam gear bolts. Locking tool works with 153- or 168-tooth flywheels and flexplates.
storage and transport of many popular transmis-
Balancing Plate ALL26120 Install between crankshaft flange and flexplate to use a Chevy 350 flexplate or flywheel with a 400 crank. GM LS Engine To TH350/TH400 Adapter Sleeve ALL26121
sions. Multi-position stand also keeps the transmission level and clean during servicing. An adjustable rear stabilizer bracket
can be moved fore and aft as well as vertically to accom- modate a variety of transmissions including Bert, Brinn, Muncie, Saginaw, Richmond and many others. Overall dimensions 11" x 14" x 6".
Crank adapter sleeve allows use of a TH350/TH400 transmission and curved flexplate with an LS engine. Simply insert adapter sleeve into the crankshaft end to center the torque converter pilot with the crankshaft. Torque Converters Ideal for mild performance applica- tions, including moderate drag racing, factory or street stocks. Economical converters are completely remanufac- tured with new pump drive hubs and thrust washers. Exact stall speeds will vary depending upon displacement, torque and vehicle weight. Part No. Description Stall Speed ALL26908 TH-350/400 10-3/4" B.C. 2000-2200 ALL26906 TH-350/400 10-3/4" B.C. 2200-2600 ALL26900 TH-350/400 10-3/4" B.C. 2700-3000 ALL26902 TH-350/400 10-3/4" B.C. 3200-3500 ALL26904 TH-350/400 10-3/4" B.C. 3500+ ALL26910 GM 700-R4 Lock-Up, ’84-Up (30-Spline) 2000-2400 ALL26912 GM 700-R4 Lock-Up, ’84-Up (30-Spline) 2400-2800
Transmission Stand ALL10175 Stand is designed to accept
most three and four speed GM manual transmissions and also Bert/Brinn style transmissions with modification to rear pad mount. Transmission Blanket ALL69010 Contains transmission explosions on high horsepower race cars
with stock firewall/ floor pan or where a
transmission shield isn’t practical. NHRA and IHRA approved blanket measures 12" x 47" and meets SFI 4.1 specifications. Includes straps to secure it to any transmission.
www.allstarperformance.com
252
Made with FlippingBook flipbook maker