40 Vane Directional Rotors Heavy duty 40 vane brake rotors provide added strength and cooling over standard 36 vane rotors. 11.75" x 1.25" 8 bolt rotors weigh just 11 pounds and have ball milled slots to keep rotor clean.
Rotor Spacer For Dirt Late Models
Minimize caliper damage from debris and maximize cooling capabilities. Rotor spacer bolts to a Wide 5 hub, moving the rotor/caliper inboard and out of the wheel shell. When used on the left rear corner, spacer also helps reduce caliper damage from this common debris area. Made from 6061 aluminum and includes eight mounting bolts. Inner Mud Shield ALL44148 Aluminum shield attaches to the axle tube to help prevent dirt build-up in the backside of the left rear wheel. Shield works with most 15" wheels and includes mounting hardware. Replacement Part ALL44149 ..... Replacement Shield ALL42014 ..... 1.75" Rotor Spacer ALL42016 ..... 2.25" Rotor Spacer
ALL42004..... LH 1.25" x 11.75" 8-Bolt ALL42005..... RH 1.25" x 11.75" 8-Bolt
ALL42004
36 Vane Directional Rotors Rotors have 36 directional cooling vanes and are 1-1/4" thick x 11-3/4" diameter Directional cooling vanes allow brakes to run much cooler than conventional rotor designs. Rotors fit solid mounting brake hats or hubs.
ALL42000..... LH 1.25" x 11.75" 8-Bolt ALL42001..... RH 1.25" x 11.75" 8-Bolt
Rotor Bolt Kit ALL42026 Grade 5, 5/16" bolts fasten disc brake rotors to rotor hat or hub. Includes ten bolts, ten washers and ten self-locking nuts. Stamped Steel Rotor Hat ALL42120 Brake hat fits 8-bolt rotors with 7" bolt circle mount. Made of stamped steel with a 3" offset and drilled for 4-1/2",
Mustang II Caliper Brackets Install 11" Granada style rotors and GM Metric style calipers on stock height or low- ered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just over one pound each and are sold individually. Commonly used on Modifieds and stock cars. ALL42111
ALL42110 ..... LH Caliper Bracket ALL42111...... RH Caliper Bracket Hybrid Mustang II Caliper Brackets
4-3/4" and 5" bolt circles. Hat has 3.060" diameter cen- tering hole and fits axle flanges with up to 5.75" diam- eter. Drilled for 1/2" wheel studs. IMCA Legal.
Install smaller hybrid style rotors and inter- mediate GM Metric style calipers on stock height or lowered Mustang II spindles with these bolt-on caliper brackets. Lightweight steel brackets weigh just one pound each and are sold individually. Commonly used on Modifieds and stock cars. ALL42118...... LH Hybrid Caliper Bracket ALL42119...... RH Hybrid Caliper Bracket GM 7.5" Rear Caliper Brackets Steel bolt-on brackets are used when
Cast Aluminum Rotor Hats Cast aluminum hats are available in two offsets, fit 8-bolt rotors with 7" bolt circle mount, have a 3.060" diameter centering hole and fit axle flanges with up to 6.050" diameter. Drilled for 1/2" studs. ALL42129 ..... 2-1/2" Offset, 2.2 Lbs. ALL42128 ..... 3" Offset, 2.5 Lbs.
ALL42118
ALL42129
converting drum brake equipped
ALL42180
ALL42181
7.5" GM style rear ends to disc brakes. 1/4" thick brackets replace the
drum brake backing plates to provide secure mounting for standard intermediate metric calipers (ALL42083 and ALL42084).
ALL42180 ..... LH Bracket ALL42181 ..... RH Bracket
Andy Barr
Photo: Marcus Berglund
www.allstarperformance.com
25
Made with FlippingBook flipbook maker