Brake Floater Brackets Steel brackets for use on the left rear suspension with GM Metric calipers.
Wilwood Superlite Caliper Bracket ALL42134 Lightweight aluminum caliper bracket bolts together for easy installation to a 3" O.D. axle tube without removing the rear hub assembly. Specially designed to mount a Wilwood Superlite caliper with 3-1/2" bolt spacing to axle tube when using a 11-3/4" diameter brake rotor. Additional locking bolts install into axle tube to help pre- vent bracket from rotating.
ALL42187
ALL42188
ALL42187 ..... Bracket With Liner ALL42188 ..... Bracket With 2 Bearings
Rear Caliper Brackets Made from 1/4" thick steel,
ALL42186
Superlite Caliper Bracket For Bolt On Snouts ALL42137 For use with 8-bolt axle tubes and bolt on snouts where there is no room for
brackets fit 3" diameter axle housings and work
ALL42102
with 11.75" diameter rotors. Available for many setups. Clamp-On Brackets ALL42101 .....Big GM, 7" Spacing
a bracket to clamp on the tube. This bracket mates between the tube and the snout and has multiple holes for preference of caliper location.
ALL42103 .....GM Metric, 5-1/2" Spacing, Wide Clamp ALL42185 ..... GM Metric, 5-1/2" Spacing, Narrow Clamp ALL42186 .....GM Metric, 5-1/2" Spacing, Narrow Clamp With Reinforcing Gussets
Brake Line Deflectors Deflectors mount on caliper or spindle on an open wheel car to protect brake lines and fittings from damage. Sold each.
ALL42105 .....Wilwood Dynalite, 5-1/4" Spacing ALL42109 .....Wilwood Superlite, 3-1/2" Spacing Weld-On Brackets ALL42100 .....Big GM Style, 7" Spacing ALL42102 .....GM Metric, 5-1/2" Spacing ALL42104 .....Wilwood Dynalite, 5-1/4" Spacing ALL42108 .....Wilwood Superlite, 3-1/2" Spacing GM Metric Caliper Bracket ALL42133 3-piece modular bracket has the caliper bracket bolted separately for easy installation to a 3" axle tube without removing the rear hub
ALL50250
ALL50250..... LH Deflector ALL50251 ..... RH Deflector
ALL50251
Brake Calipers Stock style calipers are perfect replace- ments on most GM vehicles and will fit up to 1" wide rotor. Metric inlet thread is 10mm x 1.50 pitch. Big GM inlet thread is 7/16"-20. ALL42081..... RH 1973-77 Big GM ALL42082..... LH 1973-77 Big GM ALL42083..... RH 1978-87 Metric GM ALL42084..... LH 1978-87 Metric GM
assembly. Specially designed to mount a GM Metric caliper with 5-1/2" bolt spacing to axle tube when using a 11-3/4" diameter brake rotor. Additional locking bolts install into axle tube to help prevent bracket from rotating.
Note: We reference RH (right-hand) or LH (left-hand) based on the caliper being mounted behind the rotor, however, all calipers may be mounted on the front or backside of the rotor.
Ford 9" Axle Spacer Plates Spacer plate takes the place of drum brake backing plate and properly pre- loads the tapered style axle bearing. Spacers fit large bearing Ford 9" housing ends. Sold each. ALL72318 ..... Late Torino Style ALL72319 ..... Early Style Related Item ALL72042..... Backing Plate T-Bolts (Late Style), 8-Pack
ALL42079
GM Caliper Bolts Replacement caliper bolts fit most GM calipers and allow for easy installation and removal. Bolts feature a built-in sleeve to allow for extra caliper travel. Package of 2. ALL42079 ..... Socket Head, 3/8" Allen ALL42080..... Hex Head, 5/8" Wrench
ALL42080
ALL72318
www.allstarperformance.com
26
Made with FlippingBook flipbook maker