Brake Duct Hose Flexible, non-kink hose directs air from front ducts to spindle ducts. Available in 10 ft. lengths and three temperature ranges. 275° : 3" single-ply thermoplastic rubber wall with a spring steel wire support.
Plastic Brake Ducts
ALL42140
Ducts direct outside air to brakes, oil coolers and the driver. 3" O.D. with centered, offset or dual outlets.
ALL42141
ALL42142
ALL42143
300° : 3" or 4" double-ply neoprene coated woven fiber- glass hose with spring steel inner and fiberglass external supports. Smooth inner wall for unrestricted flow. 550° : 3" or 4" double-ply silicon coated fiberglass hose with spring steel inner and fiberglass external support. Smooth inner wall for unrestricted flow. ALL42150 ..... 3"X10', 275° ALL42154...... 4"X10', 300° ALL42151 ..... 3"X10', 300° ALL42155...... 4"X10', 550° ALL42152 ..... 3"X10', 550°
ALL42140 ..... Centered, 5-1/2" x 8" ALL42141 ..... Offset, 5" x 9-3/4" ALL42142 ..... Double Hole, 5" x 9-3/4" ALL42143 ..... Single Hole, Clear, 6" x 10-3/4" ALL42144 ..... Double Hole, Clear, 9" x 11" Brake Duct Hose Flange ALL42160 Flange rivets to nosepiece. 3" brake duct hose can then be hose clamped to flange. Hanging Brake Pedal Mount ALL54060 Welds to chassis to mount Wilwood and Tilton style hanging pedals. Notched to clear balance bar. Floor Pedal Plate ALL54050 Weld-in
ALL42144
Spindle Ducts
ALL42113 ALL42112
ALL42115
ALL42114 ALL42117 ALL42116
Aluminum 3" ducts fit most fabricated spindles. Available in dual inlet, light or heavy duty single inlet. ALL42112.... LH, Dual ALL42116.....LH, Lightweight ALL42113.... RH, Dual ALL42117.....RH, Lightweight
pedal plate is 23" x 5" x 1/8" and speeds up race car construction by providing
ALL42114.... LH, Heavy Duty ALL42115.... RH, Heavy Duty
the proper spacing for mounting pedal/master cylinder assemblies.
In-Line Duct Blowers
Pedal Extensions
Kits move floor mounted pedals closer to the driver and eliminate the need for
ALL13010
ALL13008
ALL13009
Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw.
extra long seat brackets used to move the driver forward. Now just leave the seat in the desired location and move the pedals closer to the driver.
ALL13010...... 3" Compact, 5" Long, 140 CFM ALL13008 ..... 3" Heavy Duty, 8" Long, 170 CFM ALL13009 ..... 4" Heavy Duty, 6" Long, 240 CFM
ALL41050 ..... 2" Kit - Complete ALL41051 ..... 4" Kit - Complete
ALL41052 ..... 2" Master Cylinder Kit Only ALL41053 ..... 4" Master Cylinder Kit Only
ALL41050
ALL41054 ..... 2" Clutch Kit Only ALL41055 ..... 4" Clutch Kit Only
www.allstarperformance.com
28
Made with FlippingBook flipbook maker