Plunger Style Brake Light Switch ALL76253 Popular two terminal brake light switch found in most vehicles from the 1950’s to today. Ideal for most applications, switch is spring loaded to the on position and turns off when contacted by the brake pedal assembly. Switch has 1/2" threads with jam nuts for easy mounting in a bracket, and two .250" blade type terminals. Lever Style Brake Light Switch ALL76250 Switch is commonly used with under-floor mounted brake pedal assemblies when switch can contact the brake pedal arm. Spring loaded switch is designed to return to the open position and has two #10-32 tapped mounting holes, 5/8" on centers. Designed for easy two wire connection, one "+" supply and the other to power brake lights or a brake light relay. Switch is rated at 4.5 amps and features two male bullet terminals. ALL76250
Proportioning Valve ALL48025 Adjust front-to-rear brake bias with the twist of a knob. Provides up to 57% reduction. Fitting ports are 1/8"NPT. Valve includes two fittings to adapt to 3/16" brake line. 1" L, 1-3/4" W and 3-5/16" tall.
Combination Valves Multi-purpose valves are used in the brake system to properly distribute fluid to the front and rear brakes, meter the amount of fluid and pressure delivered to each brake and provide an option to connect a warning light to alert in case of brake failure.
ALL41040
ALL41040 ..... Disc/Drum ALL41042 ..... Disc/Disc Related Part ALL41044..... Connector For Warning Light
ALL41044
Pressure Activated Brake Light Switches
ALL76252
ALL76251
Bleeder Tool ALL41043 Tool temporarily replaces the warning light switch in ALL41040 and ALL41042 combination valves to keep the spool valve centered when bleeding the brake system. When bleeding the brake system, the spool valve may be forced to the front or rear and prevent proper system bleeding. NEW!
Switch is plumbed into the brake system and is activated by closing the electrical connection with rising brake pres- sure (60-120 PSI). Designed for easy two wire connection, one "+" supply and the other to power brake lights or a brake light relay. Switches are rated at 4.5 amps and have
1/8"-27 dry seal mounting threads. ALL76251 ..... Male Bullet Terminals ALL76252 ..... 6-32 Screw Terminals Residual Check Valves Residual check valves hold a small
Combination Valve Mounting Brackets
amount of pressure in the brake system to keep the brake system functioning properly while helping to maintain a firm pedal. Maintaining system pressure prevents fluid from returning to the master cylinder when the master cyl- inder is positioned lower than or close to the same height as the calipers or wheel cylinders. Proper system pressure also keeps piston and wheel cylinder seals expanded, creating a positive seal and brake pads seated against the rotor. Valves include two 3/16" inverted flare fittings.
Brackets provide a secure mount for combination valves allowing them to be mounted to the frame or directly under the master cylinder providing access to lines and fittings.
ALL41046
ALL41045 ..... Horizontal Mount Bracket ALL41046 ..... Vertical Mount Bracket
ALL41048 ..... 2 Lb. For Disc Brakes (Blue) ALL41049 ..... 10 Lb. For Drum Brakes (Red)
Brake Pressure Safety Switch ALL76255
Distribution Block With Proportioning Valve And Brake Light Switch ALL48037
Brake pressure switch is wired into the ignition system and kills power to ignition when a sudden spike in brake pressure is
Distribution block connects brake lines from the master cylinder to front and rear brakes with the added benefit of a rear propor- tioning valve and built-in pressure activated brake light switch. The proportioning valve may be adjusted
NEW!
sensed such as in an accident or emergency. Switch has an adjustable cut-off pressure from 700-1900 PSI and resets automatically when brakes are released. A weather- proof cover protects the inner adjustment screw and seals the 18" long pigtail leads. 1/8"NPT male threads.
to limit rear brake pressure to help prevent rear brake lock- up. Block ports have 3/8"-24 threads that accept 3/16" inverted flare style fittings. Block includes installation instructions, fittings, pigtail wiring harness and boot.
www.allstarperformance.com
30
Made with FlippingBook flipbook maker